- With a single wavelength of light, the single mode fiber optic can carry data and transmit audio/video applications over miles of distance
- Up to 10x faster than standard Ethernet connection and provides high-performance
- With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable
Aruba 1G SFP LC LX 10km SMF Transceiver
$924.00
- With a single wavelength of light, the single mode fiber optic can carry data and transmit audio/video applications over miles of distance
- Up to 10x faster than standard Ethernet connection and provides high-performance
- With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable
25 in stock
Weight | 0.0500 kg |
---|---|
Dimensions | 3.7000 × 2.4000 × 1.0000 cm |
Brand Name |
Aruba |
Depth |
0.5" |
Product Type |
SFP (mini-GBIC) |
Width |
2.2" |
Weight (Approximate) |
0.10 lb |
Manufacturer Part Number |
J4859D |
Product Name |
1G SFP LC LX 10km SMF Transceiver |
Manufacturer |
Hewlett Packard Enterprise |
Height |
0.6" |
UPC |
190017245850 |
MPN |
J4859D |
Related products
Vertiv Liebert IntelliSlot Unity-DP-Network Card – Remote Monitoring|Dual Protocol
The Vertiv Liebert IntelliSlot Unity-DP Network Card (IS-UNITY-DP) provides web access to Vertiv power and cooling equipment. This dual protocol (DP) card enables two of the supported third-party protocols (SNMP, BACnet, Modbus and YDN23) for interfacing with building management or data center management system applications. This card employs Ethernet and RS-485 networks to monitor and manage a wide range of operating parameters, alarms and notifications. It allows communication among Vertiv software such as Trellis, LIFE Services and Liebert Nform. The card offers real-time view of parametric data and system statuses. It also supports environmental monitoring via Liebert SN Sensors. It delivers prompt alarm notifications via email and text messaging. It allows you to save time configuring and updating firmware on managed devices. It also keeps data secure through HTTPS web connectivity, SNMP v3 and remote authentication protocols - RADIUS, TACACS+, LDAP/AD and Kerberos.
- The network card allows remote firmware updates via a web browser.
- It sends alarm notifications via email and text messaging.
- It supports environmental monitoring via Liebert SN Sensors for temperature, humidity, leak detection, doors and contact closures.
- It enables Vertiv software tools and services such as Trellis Enterprise, Trellis Power Insight, LIFE Services and Liebert Nform.
- The network card provides web access to the installed device via popular web browsers.
Cisco 1000Base-LX SFP (mini-GBIC) Transceiver
Cisco 1000BASE-LX SFP (mini-GBIC) Transceiver easy-to-install module that provide a simple way to add fiber connectivity or to add an extra Gigabit Ethernet port to your Cisco Small Business or Cisco Small Business Pro Series switches. The transceiver available for single-mode fiber-optic cabling and can support distance up to 10 kilometers.
- Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances
- Gigabit Ethernet port for ultra-fast network speeds
- With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable
SIIG IEEE 802.11n Wi-Fi Adapter for Desktop Computer/Notebook
- Upgrades your computer's networking capability with Wireless-N technology via a USB port
- Provides greater operating distance coverage than Wireless-G network connection throughout your home or office minimizing hard-to-reach areas
- Delivers high data transmission rate for high-speed internet accessing, online gaming, music or movie downloading
- MIMO technology improves data throughput and range
- Supports operating distance of up to 300ft indoor and 900ft in open space
- Supports Ad Hoc and infrastructure modes
- Build with integrated antennas
- Integrated antennas
- Provides up to 150Mbps (download and upload) data transmission rate
- Supports Ad Hoc and infrastructure modes
- Supports WLAN security with WPA, WEP (128/64) and WPS
- Operating distance: up to 300ft indoor and 900ft in open space
- MIMO technology improves data throughput and range
- Supports 2.4GHz WLAN networks and complies with IEEE 802.11n/g/b
TP-Link RE450 – IEEE 802.11ac 1.71 Gbit/s Wireless Range Extender
Boost Your Wi-Fi Coverage Up to 10,000 sq ft
Tired of Wi-Fi "dead zones"? The TP-LINK AC1750 Wi-Fi Range Extender connects to your router wirelessly, strengthening and expanding its signal into areas it can't reach on its own. The device also reduces signal interference to ensure reliable Wi-Fi coverage throughout your home or office.
Super-Fast Speed Next Generation AC Wi-Fi
TP-LINK's RE450 comes with next generation 802.11AC Wi-Fi technology, it's 3 times faster than the standard 802.11n speeds. The RE450 delivers fast speeds of dual band Wi-Fi up to 1750 Mbps, providing reliable connections for bandwidth-intensive tasks like HD/4K streaming, lag free gaming, large file downloads.
Gigabit Wired Speed
A gigabit Ethernet port turns the extender into a wireless bridge, letting you connect a wired device like a Blu-ray player, gaming console, DVR, or smart TV to your Wi-Fi network.
Easy Installation & Quick PositionEasy Installation with RE Button
The extender RE450 works with any standard wireless router. Instantly connect the RE450 to a router by pressing the extender's RE button followed by the router's WPS button (if available).
Once connected with an existing router, you can take RE450 to an ideal place, no more further configurations.
Quick Positioning with Intelligent Signal Indicator
The Intelligent signal light can help to find the best location to place the extender.
- All Wi-Fi extenders are designed to increase or improve Wi-Fi coverage, not to directly increase speed. In some cases improving signal reliability can affect overall throughput.
- RE450 is PCMag's Editors Choice Winner. Operating Temperature: 0°C to 30°C (32°F to 86°F).
- Easy Set Up - Smart indicator light helps to install in best optimal location. 3 adjustable external antennas for superior coverage throughout the home.
- Stay connected - Expand coverage for your phone (Galaxy, iPhone, Android etc.), Media Streaming, Gaming, Web Browsing, Alexa, Echo, Ring and more.
- Eliminate Wi-Fi Dead Zones - Enjoy Lag-Free connection to any type of devices, including wired devices via Gigabit Ethernet Port.
- Extend Wi-Fi Coverage - Boosts Internet Wi-Fi Coverage up to 2000 Square feet and connects up to 32 devices - Compatible with any Router, Gateway, Access Point (2.4GHz - 450Mbps ; 5GHz - 1300Mbps). Power Consumption: 9W (max power consumption).
Netgear AV Line M4250-10G2F-PoE+ 8x1G PoE+ 125W 2x1G and 2xSFP Managed Switch (GSM4212P)
The NETGEAR AV Line M4250 series was designed with input from AV Professionals. The result is a line of switches built from the ground up to support 1Gb audio and video over IP with customized hardware and software along with dedicated service and support.
NETGEAR M4250 series key features:
- Ranges from 8 to 16 ports with a variety of PoE+ and Ultra90 PoE++ options for 15.4W, 30W, 60W, 75W and 90W AVoIP endpoints
- Uplink options include 1G for audio installations or standalone video installations as well as 10G uplinks for larger scale video deployments
- Also includes 12-port multi-gigabit Ethernet and 16-port 1G/10G fiber models for plug and play aggregation in a star topology
- Designed for a clean integration with traditionalrack-mounted, AV equipment
- The M4250 switches come with a sleek, black display panel with status in front and all cabling plus additional status in the back
- Reversed mounting is possible when ports are desired on the front of the rack
- A second pair of rackmount ears allows the switches to be mounted recessed by 2-inches to allow for the cabling
- Software-controlled fan adjustments enable the fans to be turned off when ambient temperature and PoE loads are appropriate for a totally fanless operation
- Threaded holes on the bottom (4xM5 for 50x100mm VESA) and in front (1xM10 for clamps) allow for universal mountingoptionsoutside the rack as well
- Pre-configured for audio and video over IP out of the box, the M4250 switches enable encoders and decoders to be connected with zero configuration
- When more configuration is required, an AV web-based GUI is available at the switch IP address:8080
- This interface has been specially designed for AV installers with specific AV-related controls made more accessible and with port-based profiles
- For audio, profiles for Dante, Q-SYS and AES67 are built-in, as well as an AVB profile (AVB license sold separately
- For video, the M4250 offers profiles for NVX, SVSI, Q-SYS, NDI, Kramer KDS, Aurora Multimedia, ZeeVee, Atlona, Dante and SDVoE
- Other AV CODECs and manufactures are supported as well as audio/video/ control mixed profiles
- To further simplify star deployments, NETGEAR IGMP Plus™ brings multicast automation between all M4250 switches, and with M4300/M4500
- Simply connect the switches together and you are done!
- All M4250 switches share the same high-end NETGEAR Layer 2 / Layer 3 switching engine for a consistent experience
- All switches in the M4250 series have another main, IT web-based GUI for midsize Enterprise campus networks, IoT and IPTV
- Additional features include static, RIP and PIM-SM, DM and SSM multicast routing, DHCP Server and PTPv2 Transparent Clock (1-step E2E)
- AVB is the only feature requiring a license, all other advanced features are available license-free
- Advanced classifier-based, time-based hardware implementation for L2 (MAC), L3 (IP) and L4 (UDP/TCP transport ports)
- Selectable Port-Channel / LAG (802.3ad - 802.1AX) L2/L3/L4 hashing for fault tolerance and load sharing with any type of Ethernet channeling
- Voice VLAN with SIP, H323 and SCCP protocols detection and LLDP-MED IP phones automatic QoS and VLAN configuration
- Efficient authentication tiering with successive DOT1X, MAB and Captive Portal methods for streamlined BYOD
- Features 10 networking ports to easily establish a local network or expand your existing one
- Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters
- Up to 10x faster than standard Ethernet server connectivity while providing high-performance uplinks
- Can work as layer 3 routing for scalable network design
- Built-in power supply to ensure all components are being supplied with accurate voltage
- Rack mounting enables you to organize wires & secure cables for professional installation
Netgear M4300 24x1G PoE+ Stackable Managed Switch with 2x10GBASE-T and 2xSFP+ (1000W PSU)
The NETGEAR M4300 Stackable Switch Series delivers L2/L3/L4 and IPv4/IPv6 cost-effective services for mid-enterprise edge with full PoE+ and SMB core deployments with unrivalled ease of use: 10 Gigabit models can seamlessly stack with 1 Gigabit models within the series, enabling spine and leaf line-rate stacking topologies. Non-stop forwarding (NSF) virtual chassis architectures provide advanced High Availability (HA) with hitless failover across the stack. Dual redundant, modular power supplies equipping full width models contribute to business continuity management. Layer 3 feature set includes static, dynamic and policy-based routing - as standard. Perfect for wireless access, unified communications and IP video, the NETGEAR M4300 Switch Series is also ready for the future, with Software-defined Network (SDN) and OpenFlow 1.3 enabled for your network.
Best-in-class stacking- M4300 is flexible enough for mixed stacking between 10 Gigabit and 1 Gigabit models, using any 10G port with any media type (RJ45, SFP+, DAC cables)
- High-availability is another key differentiator for stackable solutions: in case of a master switch failure, NSF and hitless failover ensure the standby switch takes over while forwarding plane continues to forward traffic on the operational stack members without any service interruption
- Two half-width M4300 switches can be paired in a single rack space for redundant Top of Rack installations with Auto-iSCSI prioritization
- 10 Gigabit ports are all independent and 1G backward compatible for progressive transition to 10G speeds
- Entire feature set including L2 switching (multi-tiered access control) and L3 routing (static, RIP, OSPF, VRRP, PIM, PBR) is available without license
- DHCP/BootP innovative auto-installation including firmware and configuration file upload automation
- Line-rate spine and leaf stacking topologies offer multiple possibilities in server rooms, in branch collapsed cores or at the edge of growing networks
- Even if an organization is not ready for SDN, OpenFlow support offers future-ready design for maximum investment protection
- With successive tiering, the Authentication Manager allows for authentication methods per port for a tiered authentication based on configured time-outs
- With BYOD, tiered Dot1x -> MAB -> Captive Portal authentication is powerful and simple to implement with strict policies
- Industry standard command line interface (CLI), functional NETGEAR web interface (GUI), SNMP, sFlow and RSPAN
- Single-pane-of-glass NMS300 management platform with centralized firmware updates and mass-configuration support
- NETGEAR M4300 series is covered under NETGEAR ProSafe Lifetime Hardware Warranty
- 90 days of Technical Support via phone and email, Lifetime Technical Support through online chat and Lifetime Next Business Day hardware replacement
- Features 26 networking ports to meet the requirements of the most demanding workgroups
- Gigabit Ethernet port for ultra-fast network speeds
- Can work as layer 3 routing for scalable network design
- Management capability provides control over setup and configuration of your network
- Built-in power supply to ensure all components are being supplied with accurate voltage
Tripp Lite LC Multimode Fiber Media Converter Gigabit RJ45 10/100/1000 550M 850nm
- Supports Multimode 50/125 cable up to 550M or 62.5/125 cable up to 400M
- Auto detects Full/Half Duplex Transfer Mode
- Extends a Gigabit Ethernet signal up to 550 meters over Multimode Fiber Optic Cable
StarTech.com StarTech.com StarView SV431USB – KVM switch – USB – 4 ports – 1 local user – USB – 1U
The SV431USB 4 Port rack mountable VGA USB KVM Switch with Hub offers simple control of up to four computers from a single monitor/display and USB peripheral set (keyboard, mouse).
The USB KVM switch features an integrated 4 port USB hub, allowing you to share connected USB peripherals between the four controlled PC/Mac computers as though the devices were connected directly.
Offering convenient placement and installation options, the KVM switch features a 1U rack-mountable form factor and rear port connection to master and slave computers, allowing you to make the necessary device connections without disrupting your workspace.
A cross-platform solution, the KVM switch supports high resolution applications at up to 1920x1440 and provides a smooth operating experience when controlling mixed (Windows/Mac OS/Linux) environments.
This product is TAA compliant and backed by a Startech.com 3 year warranty with free lifetime technical support.
Rackmount your KVM switch
If you'd like to mount this KVM switch to your server rack, StarTech.com offers a 1U Rackmount Bracket(sold separately) that turns this KVM into a rackmountable KVM.
- USB 2.0 hub for peripheral sharing
- USB self-power operation
- High 1920x1440 resolution capability
- OS independent - No driver or software installation required
- Front panel push-buttons for quick and easy switching
- Supports hot-plug and disconnect ? computers can be added or removed without the need to reboot other connected systems
Reviews
There are no reviews yet.