Belkin 24 Port Cat5e Network Patch Panel
What is a patch panel? Think of it as an old fashioned switchboard. A place where network connections are made and often rearranged, which guide the information to the correct destination, each and every time. The RJ45 CAT 5e patch panel is 19 inch rack mountable and supports both 568A and 568B installations. Compatible with 110 punchdown tools, this Patch Panel's front-loading modular design makes termination, upgrading and trouble-shooting easy at any location and any position. This CAT5e patch panel mounts on a 19-inch rack and supports both T568A and T568B installations. The front-loading snap-in modular design makes it easy to install and troubleshooting. The snap-in modular design is also perfect for tight space application because you no longer have to terminate it behind the rack, everything can be done at the front of the rack
Tripp Lite 48-Port Cat6 Cat5 Patch Panel High Density 110 Punch down Rackmount 1URM TAA
Tripp Lite's 1U, 48port, Cat6 High Density Patch panel frees up valuable rack real estate by condensing a typical 2U 48 port patch panel into 1U of space. The unique design allows for easy punch down termination. Simply unscrew 4 slotted thumbscrews to remove the "upper deck" punch down array. Punch down the "lower deck" cables first, then replace the upper deck, and punch down upper array. Integrated wire loom keeps cabling tidy and easy to route. Heavy Duty 14GA cold rolled steel construction. 110 connectors are color coded for either 568A or 568B wiring.
- Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
- Built-in wire management loom
- Removable "upper-deck" for easy punch down termination
- Space saving CAT6 Rated 48-port 1U 110 type Patch panel
Tripp Lite 48-Port Cat5e Cat5 Rackmount Patch Panel 568B 110 Punch 2URM TAA
Tripp Lite's Enhanced Category 5 Patch Panels offer you all the functionality and compatibility as any name brand. Each panel comes with 110-type termination, while meeting and exceeding EIA/TIA TSB-40 Cat5e connecting hardware specifications. Color coded for both EIA/TIA 568A & 568B installations. 48 ports ensure a wide range of plug-n-play options. The clear numbering on both the front and back of each panel gives you a quick and easy way to identify cable runs and the high density 19in panel design will save you valuable space in on the rack.
- Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
- 110 type punchdown termination
- EIA/TIA 2/32 spacing
- 19-in. rackmount ready, 2U Height ( 3.50in )
Tripp Lite 24-Port Cat6a Shielded Patch Panel – 10 Gbps, STP, 110 Punch Down, RJ45, 1U, TAA
Shielded 24-Port Patch Panel for High-Speed Cat6a Network Cabling
Organize and manage your high-density Cat6a application without taking up too much valuable rack space. This shielded patch panel offers 24 fully shielded RJ45 ports with color-coded 110 punch-down slots that are terminated using a proper punch-down tool. Both the front and rear connectors are clearly numbered and labeled (for custom naming) to help you identify individual cable runs. The patch panel supports T568A and T568B wiring standards. It is fully rated for 10 Gbps data transfer speeds in your network application.
Condenses 24 Ports into Just 1U of Space in Your 19 in. Enclosure or Open Frame Rack
The UL-certified patch panel supports mounting in 1U of EIA-standard 19-inch racks using the included hardware, freeing up valuable rack space for other equipment. Included cable ties and grounding wire help organize your connections, cut down on cable clutter, take stress off the connectors and maintain stable performance.
TAA-Compliant for GSA Schedule Purchases
The N252-024-6A-SH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
- Rated for 10 Gbps speeds for managing network connections in Ethernet applications
- 24 RJ45 ports numbered, labeled and color-coded for convenient wiring and ID
- Supports EIA/TIA T568A/B wiring standards for 110 punchdown terminations
- Mounts easily into 1U of space in your 19 in. rack for immediate use
- Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
Tripp Lite N48M-24M8L4-10 Preloaded Fiber Patch Panel
Preloaded Fiber Patch Panel, 3U - 24x (12F MTP/MPO-PC to 4x LC Duplex F/F) 8F Trunk Cables, OM4 Multimode, 10 m (32.8 ft.)
Features
3U Panel Solution Comes with Cabling Preloaded to Cut Costs and Save Time
All necessary cabling is included with this preloaded fiber panel, coiled inside and ready for immediate use. The aluminum 3U chassis features 24 MTP/MPO-PC to LC Duplex 8-fiber multimode trunk cables, all 10 meters (32.8 feet) in length to make management easy. The panel opens to provide easy access to stored cables. Use only as much cabling as you need. The remainder stores inside the chassis to eliminate cable clutter, allow better airflow through the rack and make equipment maintenance and replacement easier. The cables and panels have labels to help with organization. You also avoid the expense and effort of custom cabling. The flexibility in cable length lets you reuse the cables if equipment is moved.
Integrates Equipment to Meet Current Connectivity Needs
This preloaded slack-free panel helps integrate your 10 Gb equipment with 40 Gb networks or 25 Gb equipment with 100 Gb networks in a simple, elegant and flexible manner. The N48M-24M8L4-10 mounts in just 3U of space in an EIA-standard 19-inch rack.
Typical Applications
- Integrate 10G equipment with a 40G network or 25G equipment with a 100G network
- Save the expense and effort of buying custom cables or repurchasing cables after moving rack equipment
- Eliminate cable clutter by using only as much as you need and storing excess cable inside the panel
- 24 MTP/MPO-to-LC 8-fiber OM4 multimode cables come coiled inside for instant use
- Use only as much cable as you need; store the remainder inside to avoid clutter
- Flexible cable length allows reuse of cables if equipment is moved
- 96 LC Duplex ports protected by fold-down front panel with organization labels
- Aluminum chassis mounts into 3U of space in EIA-standard 19 in. racks
- This product is covered by a Lifetime Limited Warranty
Tripp Lite 24-Port Cat6a Cat6 Cat5e Feed-Through Patch Panel Offset RJ45 1U
No 110 punchdown termination is required. Just plug your Cat6a cables into the 24 RJ45 coupler jacks on both sides of the panel. The detachable cable management bar keeps patch cables neat, tidy and efficiently organized on the back of the panel. Ports are clearly numbered and labeled to help you identify connections. This Cat6a feed-through patch panel mounts easily into 1U of an EIA-standard 19-inch rack. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
Features
Cat6a Feed-Through Patch Panel Manages and Organizes High-Density Network Cabling
- Meets or exceeds Cat6a specifications
- Backward compatible with Cat6 and Cat5e cables
- Works with USOC, T568A and T568B wiring to comply with industry standards
- Fully rated for 10 GbE data transfer speeds
24 RJ45 Coupler Jacks Staggered to Ward Off Interference
- Front and rear RJ45 jacks are offset to prevent crosstalk and interference emanating from adjacent ports
- Ports are numbered and labeled for easy connection identification
- Low-profile form factor requires no 110 punchdown termination
Cable Management Bar on Rear
- Detachable bar keeps patch cables neat, tidy and organized
Quick, Easy Installation
- Mounts into 1U of EIA-standard 19 in. racks
TAA-Compliant for GSA Schedule Purchases
- Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule Purchases
- Staggered RJ45 jacks reduce crosstalk and interference
- Meets or exceeds Cat6a specifications
- Cable management bar keeps patch cables organized
- Fully rated for 10 GbE data transfer speeds
- Mounts into 1U of EIA-standard 19 in. racks
Black Box CAT6A Patch Panel – 1U, 24-Port
Features built-in rear cable management bar and a grounding wire. Large port numbers make ID easy. Shielded jacks snap in from the rear. Works with CAT6a Shielded Jacks (FMT700). Guaranteed for life!
- Guaranteed for life!
- Shielded jacks snap in from the rear.
- Features built-in rear cable management bar and a grounding wire.
- Large port numbers make ID easy.
Intellinet Network Solutions 24-Port Rackmount Cat6 UTP 110/Krone Patch Panel, 1U
Cat6 Patch Panel features solid and reliable terminations for copper cabling and a minimum of 3mm 50 micro-inch gold-plated jack contacts. Compatible with both 110 and Krone punch-down tools, panel supports 22 to 26 AWG stranded and solid wire. Use with unshielded twisted pair (UTP) Cat6 network cable. Ideal for Ethernet, Fast Ethernet and Gigabit Ethernet network applications, patch panel connects 24 RJ-45 ports to a network. Panel occupies 1U rack height and meets 19 rackmount standards.
"- Solid and reliable terminations for copper cabling
- Features a minimum of 3mm, 50 micro-inch, gold-plated jack contacts
- Compatible with both 110 and Krone punch-down tools
- Supports 22 to 26 AWG stranded and solid wire
- For use with unshielded twisted pair (UTP) Cat6 network cable
Intellinet Patch Panel, Cat5e, Wall-mount, UTP, 12-Port, Black
The backbone of your network is central to your organization's success. Trust Intellinet Network Solutions to provide Patch Panels that maintain the integrity of your data. The Patch Panel enables you to quickly change the port assignment of any piece of equipment that's attached to your network. Our range of Patch Panels feature varying port densities across a complete range of specifications-from Cat5e to Cat6a in both Unshielded and Shielded varieties. All Patch Panels comply with current industry standards and are 19"-rack compliant.
Tripp Lite 24-Port Cat6 Cat5e Patch Panel Low Profile Feed Through Rackmount RJ45 1U TAA
Tripp Lites N250-024-LP, Cat6 Feed-Through Low Profile patch panel, makes cable patching quick and easy, by simply plugging Cat6 patch cables into either side of the Cat6 couplers. Ninety degree angles on the couplers allows for low profile mounting to a wall with included stand-off brackets. Cables feed into the front of the panel, and corresponding patch cables exit Up, Down, Left, or Right, depending on the mounting position. Patented printed circuit board design within the coupler exceeds NEXT requirements for Cat6 component testing, assuring Gigabit+ speeds.
- Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
- Exceeds TIA-EIA-568-C.2 Cat6 Component requirement
- 90 degree Cat6 RJ45 jacks allows easy cable routing
- Wall mountable with standoff brackets, or rack mountable
AddOn 4-Bay Cassette 3x 12-Fiber MPO In, 12 LC Duplex Out, Single-mode Duplex OS2
This is an MPO fiber optic cassette for a 4-bay interchangeable patch panel with 3 MPO In and 12 LC Duplex Out, single-mode duplex OS2. It is a highly flexible fiber management unit that can be used stand-alone or integrated into the MPO fiber optic patch panels. Additionally, we supply a high-quality MPO cassette designed to reduce installation time and cost for optical network infrastructures in the premises environment. All of our products are 100% guaranteed to work, providing you a cost effective solution for all of your network upgrade needs.
Tripp Lite Cat5 / Cat5e PoE Patch Panel 24-Port 110 568A/B RJ45 1URM TAA
24-Port Patch Panel Manages and Organizes High-Density Cat5e Network Cabling
This patch panel enables quick, easy cable patching. Just plug Cat5e cables into its 24 front RJ45 ports, and use a 110 or Krone punch-down tool (do not use a 4/5 pair 110 punch-down tool) to terminate color-coded connections in the rear. Both the front and rear connectors are clearly numbered, and the front ports have blank labels to help you identify individual cable runs. The N052-P24 supports EIA/TIA 568A and 568B wiring standards and is compatible with all network applications.
Specifically Designed for Use in Power over Ethernet Plus (PoE+) Applications
This Power over Ethernet patch panel maximizes performance with PoE+ applications. It prevents spark-gap erosion that degrades the plug and jack contacts over time and can affect data and/or power transmission capabilities. The N052-P24 is designed to handle the frequent mating and unmating of surveillance cameras, VoIP phone systems, wireless access points and other PoE and PoE+ devices under electrical load.
Mounts in 1U of Space in Your 19 in. Enclosure or Open Frame Rack
The high-density patch panel supports mounting in 1U of space in EIA-standard 19-inch racks. Included cable ties and a removable cable management bracket help organize your connections, cut down on cord clutter and maintain stable performance.
TAA-Compliant for GSA Schedule Purchases
The N052-P24 is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Lifetime Warranty
The N052-P24 is backed by a lifetime warranty, ensuring reliability and performance.
Typical Applications
- Patch cables to PoE+ devices mounted in areas that are difficult to reach or have no electrical outlets
- Add routers, switches, wireless access points, security cameras, sensors and other PoE+ devices to an Ethernet network configuration
- Power over Ethernet patch panel prevents spark-gap erosion that can affect transmission
- 24 RJ45 and 110 ports numbered/labeled for immediate cable identification
- Mounts easily into 1U of space in your EIA-standard 19 in. rack for immediate use
- Supports EIA/TIA 568A/B wiring standards for either 110 or Krone-type terminations
- Ideal for managing Cat5e cable patching in high-density IT environments
Tripp Lite 24-Fiber Patch Panel MTP/MPO to x12 LC 10Gb Breakout Cassette
- Max insertion loss of 0.35dB falls well under the IEEE 802.3ae maximum channel loss spec of <25dB
- Complies with IEEE 802.3ae (10GbE) and ANSI T11.2 (Fibre Channel) requirements
- Factory terminated connectors reduce the time and labor required of field connector terminations
- Internal OM4 wiring
- Cassette designed specifically for use with Tripp Lite cables, such as the N820-, N821- and N846-Series cables
- Guaranteed compatibility when used with recommended Tripp Lite cabling
- 24-Fiber MTP port designed for 100GBASE-SR10, CFP, CXP, Parallel Optics connectivity
- 100/120Gb to 10Gb Breakout Cassette, with (x12) LC connections to a 24-Fiber MTP/MPO connection ( Male w/Pins )
- High Density Fiber Cassette for use with Tripp Lite N482-01U and N482-02U High Density Fiber Enclosure Panels
Tripp Lite 24-Port Cat6a Cat6 Cat5e Patch Panel 110 Punchdown RJ45 1URM TAA
110 punchdown termination is required. The detachable cable management bar keeps patch cables neat, tidy and efficiently organized on the back of the panel. Ports are clearly numbered and labeled to help you identify connections. The 24-port Cat6 patch panel mounts easily into 1U of an EIA-standard 19-inch rack. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
- Meets or exceeds Cat6a specifications
- 24 RJ45 ports numbered and labeled for easy ID
- Cable management bar keeps patch cables organized
- Fully rated for 10 GbE data transfer speeds
- Mounts into 1U of EIA-standard 19 in. racks
Tripp Lite 12-Fiber Patch Panel MTP/MTO x 12 40Gb Pass Through Cassette
- Heavy-duty steel housing
- Factory-terminated connectors
- Simple installation with no tools required
- Connect up to twelve 40 GB 12-fiber MTP/MPO cables
- For use with Tripp Lite N482-01U or N482-02U enclosure panels
Tripp Lite 100Gb/120Gb to10Gb Breakout Cassette 24-Fiber MTP/MPO 12 LC
- Max insertion loss of 0.35dB falls well under the IEEE 802.3ae maximum channel loss spec of <25dB
- Complies with IEEE 802.3ae (10GbE) and ANSI T11.2 (Fibre Channel) requirements
- Internal OM4 wiring
- 100/120Gb to 10Gb Breakout Cassette, with (x12) LC connections to a 24-Fiber MTP/MPO connection
- High Density Fiber Cassette for use with Tripp Lite's N484-00U and N484-01U chassis'
Intellinet Network Solutions 48-Port Rackmount Cat6 UTP 110/Krone Patch Panel, 2U
Intellinet Network Solutions is a leading provider of both active and passive networking products. Our range of award-winning, innovative technologies enables businesses to deliver end-to-end networking solutions, ensuring optimal systems efficiency, reliability and security. Intellinet provides comprehensive technical support, marketing materials, high-quality packaging, and other offerings.
Tripp Lite N252A-024-HUSHK Cat6a 24-Port Patch Panel, 0.5U
Shielded 24-Port Patch Panel Manages and Organizes High-Density Cat6a Network Cabling
Organize your high-density Cat6a application without taking up too much valuable rack space. This shielded patch panel offers 24 fully shielded RJ45 ports with color-coded dual IDC slots that are terminated using either a proper Krone or 110 punchdown tool. Both the front and rear connectors are clearly numbered and labeled (for custom naming) to help you identify individual cable runs. The patch panel supports T568A and T568B wiring standards and is fully rated for 10 Gbps Ethernet data transfer speeds in your network application.
Condenses 24 Ports into Just 0.5U of Space in Your 19 in. Enclosure or Open Frame Rack
The high-density UL-approved patch panel supports mounting in only a half-U in EIA-standard 19-inch racks, freeing up valuable rack space for other equipment. Included cable ties, grounding wire and a built-in strain relief bar help organize your connections, cut down on cord clutter, take stress off the connectors and maintain stable performance.
Typical Applications
- Connect computers, routers, switches, wireless access points, security cameras, sensors and other high-speed devices in a 10G network configuration
- 24 RJ45 ports numbered, labeled and color-coded for easy cable identification
- Rated for 10 Gbps speeds for managing Cat6a cable in high-density Ethernet applications
- Dual IDC terminations allow use of either Krone or 110 punchdown impact tool
- Built-in strain relief bar takes stress off connectors and cuts cable clutter
- Mounts easily into 0.5U of space in your EIA-standard 19 in. rack for immediate use
- This product is covered by a Lifetime Limited Warranty
C2G 32-Port Blank Keystone/Multimedia Patch Panel
32 port Blank Keystone/Multimedia Patch Panel offer you all the functionality and compatibility as any name brand at a fraction of the cost. Each panel has cutouts that accept virtually all snap-in jacks, making the panels perfect for ethernet, voice, audio/video, and/or other applications.The clear numbering on the front gives you a quick and easy way to identify cable runs. Designed to mount to any standard 19in Relay Rack, Cabinet or Wall Bracket.
Tripp Lite High Density Copper Fiber Cassette Sleeve 1-Cassette Capacity 0U
Tripp Lite's N484-00U is a compact, 0U chassis that allows you to mount a single High Density Copper / Fiber Cassette on the metal surface of any rack enclosure, cable manager, or other similar structure via the attached magnets. Unlike standard rackmount solutions, the N484-00U allows you to locate a copper / fiber cassette where standard chassis' cannot go, connecting cables at the cable manager where they are being routed through. It's also perfect for adding copper / fiber connectivity where no existing rack infrastructure exists, such as a remote work station, a new build-out, or temporary install locations. Choose amongst a wide array of cassettes ranging from LC and MTP fiber to RJ45 copper. Fiber cassettes come in multiple variations, allowing you to connect and interconnect your 10Gb, 40Gb, and 100/120Gb equipment. In addition, it gives you the flexibility to add as you go, without needing to purchase a 1U chassis when you only need to add one more cassette.
- Fiber cassettes allow for the connection and interconnection of 10Gb, 40Gb, and 100/120Gb equipment
- Choose amongst a wide array of cassettes ranging from LC and MTP fiber to RJ45 copper, all in a single 0U sleeve
- Perfect for adding Copper / Fiber connectivity where no existing rack infrastructure exists, such as a remote work station, a new build-out, or temporary install locations
- Space Saving 0U design allows a Copper / Fiber Cassette to be mounted on the metal surface of any rack enclosure, cable manager or other similar structure via the attached magnets
Black Box CAT6 Shielded Patch Panel – 1U, 24-Port
Ideal for noisy environments. Features a nickel-plated snap-on frame. 110-type IDC terminations enable connections with 22-AWG - 26-AWG cable. Contacts are 0.018" (.46 mm) diameter phosphor bronze, 50-um gold over nickel plating. Works with our CAT6 Shielded Jacks. Fits all 19" racks. Includes all mounting hardware, ID covers and labels, and cable ties.
- Guaranteed for life!
- Includes all mounting hardware, ID covers and labels, and cable ties.
- Works with our CAT6 Shielded Jacks.
- Fits all 19" racks.
- Contacts are 0.018" (.46 mm) diameter phosphor bronze, 50-µm gold over nickel plating.
- 110-type IDC terminations enable connections with 22-26-AWG cable.
- Features a nickel-plated snap-on frame.
- Ideal for noisy environments..
- Use in high-speed data, voice, and multimedia applications. Guaranteed for life!
Cisco NCS 1000 64 chs Odd Mux/Demux Patch Panel – C-band
The Cisco®NCS 1000 Mux/Demux 64-Channel Patch Panel is a standalone passive unit that contains both a 64-channel optical multiplexer and a 64-channel optical demultiplexer, precabled within the unit's housing.
This unit provides support for 400ZR and NCS1004 multihaul coherent channels up to 63 Gbaud at 75-GHz spacing. This filter is designed with optimum tradeoff between bandwidth and isolation for a network designed with 64 channels of 400ZR.
The panel's ports are arranged in 18 columns and 5 rows. The placement of the clips provides optimal fiber routing, facilitating the addition of fibers in an incremental manner and resulting in a simple design that is easy to maintain and troubleshoot. A separate tie wrap is provided for fastening the USB cable used for passive inventory management and storage of insertion loss values. The panel shall fit into ETSI 300-mm and ANSI 450-mm racks.
- Optimized for network architectures with 400ZR and openZR+ DCOs
- Can be used in multiple use cases:
- Standalone with any third-party line systems
- With NCS1001 line system for metro P2P applications
- With NCS2000 line system for ROADM use cases
- Ease of operation with 400ZR or openZR+ optics on the router and NCS1001 as line system
- Suitable for 63-Gbd coherent DWDM channels from Cisco or any alien transponder
- Best-in-class operational efficiency with zero electrical power requirements
- Fiber management plate with integrated clips for secure but easy fiber access
- Low optical insertion loss for improved distance and performance
- USB port for passive inventory
Tripp Lite N250-P12 12-Port Wall-Mount Cat6 Patch Panel – PoE+ Compliant
12-Port Patch Panel Manages and Organizes High-Density Cat6 Network Cabling
This patch panel enables quick, easy cable patching. Just plug Cat6 patch cables into its 12 front RJ45 ports, and use a 110 or Krone punch-down tool (do not use a 4/5 pair 110 punch-down tool) to terminate color-coded connections in the rear. Both the RJ45 ports and 110 terminals are clearly numbered, and the front ports have blank labels to help you identify individual cable runs. The N250-P12 supports EIA/TIA 568A and 568B wiring standards and is compatible with all network applications.
Specifically Designed for Use in Power over Ethernet Plus (PoE+) Applications
This Power over Ethernet patch panel maximizes performance with PoE+ applications. It prevents spark-gap erosion that degrades the plug and jack contacts over time and can affect data and/or power transmission capabilities. The N250-P12 is designed to handle the frequent mating and unmating of surveillance cameras, VoIP phone systems, wireless access points and other PoE and PoE+ devices under electrical load.
Effortlessly Mounts to a Wall or Desk Using the Included Frame
The 12-port patch panel is constructed from aluminum with an ABS plastic frame that mounts to a wall, desk or similar flat surface. The patch panel easily snaps into and out of the frame, allowing you to remove it to make new connections and snap it back into place. Included cable ties help organize your connections and cut down on cord clutter.
TAA-Compliant for GSA Schedule Purchases
The N250-P12 is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Lifetime Warranty
The N250-P12 is backed by a lifetime warranty, ensuring reliability and performance.
Typical Applications
- Patch cables to PoE+ devices mounted in areas that are difficult to reach or have no electrical outlets
- Add routers, switches, wireless access points, security cameras, sensors and other PoE+ devices to an Ethernet network configuration
- Power over Ethernet patch panel prevents spark-gap erosion that can affect transmission
- 12 RJ45 and punchdown ports numbered/labeled for immediate cable identification
- Durable aluminum panel with ABS plastic frame that mounts easily to wall or desk
- Supports EIA/TIA 568A/B wiring standards for either 110 or Krone-type terminations
- Ideal for managing Cat6 cable patching in high-density IT environments
Black Box CAT6 Feed-Through Patch Panel – 1U, Unshielded, 48-Port
This Black Box CaT6 feed-through patch panel provides high density and easy patching solutions in data centres. The Cat6 patch panel is designed for use in 19" racks and bundles the networks together to connect incoming and outgoing lines and improve the organisation of a wired network. This network patch panel enables quick and easy identification of cable runs, and the detachable cable management bar keeps cables neat and tidy.
- Cable management bar helps support cables attached to the rear of the panel
- Ideal for locating desktop concentrators or hubs on a 19"" rack
- Meets Category 6 performance requirements
- Sturdy panel for high-density applications in relay racks or communications cabinets
- Provides patching without punching down the wires to the ports
- Feed-through connectors provide super-easy cable management
- Total 48 CAT6 RJ-45 to RJ-45 feed-through ports
Tripp Lite N48M-64M8L4-03 Preloaded Fiber Patch Panel
3U patch panel comes preloaded with spools of multimode fiber cable that allow you to extend the exact length required and store the excess out of sight.
Description
Preloaded Fiber Patch Panel, 3U - 64x (12F MTP/MPO-PC to 4x LC Duplex F/F) 8F Trunk Cables, OM4 Multimode, 3 m (9.8 ft.)
Features
3U Panel Solution Comes with Cabling Preloaded to Cut Costs and Save Time
All necessary cabling is included with this preloaded fiber panel, coiled inside and ready for immediate use. The aluminum 3U chassis features 64 MTP/MPO-PC to LC Duplex 8-fiber multimode trunk cables, all three meters (9.8 feet) in length to make management easy. The panel opens to provide easy access to stored cables. Use only as much cabling as you need. The remainder stores inside the chassis to eliminate cable clutter, allow better airflow through the rack and make equipment maintenance and replacement easier. The cables and panels have labels to help with organization. You also avoid the expense and effort of custom cabling. The flexibility in cable length lets you reuse the cables if equipment is moved.
Integrates Equipment to Meet Current Connectivity Needs
This preloaded slack-free panel helps integrate your 10 Gb equipment with 40 Gb networks or 25 Gb equipment with 100 Gb networks in a simple, elegant and flexible manner. The N48M-64M8L4-03 mounts in just 3U of space in an EIA-standard 19-inch rack.
- 64 MTP/MPO-to-LC 8-fiber OM4 multimode cables come coiled inside for instant use
- Use only as much cable as you need; store the remainder inside to avoid clutter
- Flexible cable length allows reuse of cables if equipment is moved
- 256 LC Duplex ports protected by fold-down front panel with organization labels
- Aluminum chassis mounts into 3U of space in EIA-standard 19 in. racks
Tripp Lite 9/125 40GB -10GB Fiber Breakout Cassette MTP/MPO to 12 LC Dup
The N482-3M8L12S-B 9/125 Fiber Breakout Cassette works in tandem with Tripp Lite's N482-01U or N482-02U chassis to connect 12 LC duplex fiber cables with three 8-fiber MTP/MPO connections in high-density network applications. The cassette features three built-in 2-meter 8-fiber MTP cables. Color-coded yellow singlemode cables are easily distinguished from traditional aqua OM3 multimode fiber.
The cassette's modular design installs easily in the N482-01U and N482-02U chassis with no tools required. Just insert the cassette into the chassis, and screw in its retention clips to secure it. Plug LC patch cables, such as Tripp Lite's N370-01M cables, into the cassette. Up to five N482-3M8L12S-B cassettes fit in the N482-01U 1U enclosure panel, and up to 14 cassettes fit in the N482-02U 2U sleeve. Dust tabs protect unused ports from potential damage.
The N482-3M8L12S-B complies with IEEE 802.3ae (10 GbE) and ANSI T11.2 (Fibre Channel) requirements. Supports 40 GbE internally using 9/125 singlemode fiber optic cable. Ideal for QSFP fabric switches that use eight out of 12 available MTP fibers for four-lane parallel optics to 40 GB, allowing all 12 LC duplex cassette ports to be used. Maximum insertion loss of 0.35 dB falls well under the IEEE 802.3ae maximum channel loss specification of
With factory-terminated connectors that reduce time and labor, the N482-3M8L12S-B is made from only the finest materials to ensure fast installations and optimal performance.
Features
Elegant, Simple Solution for 40 GB to 10 GB LC Cable Connections
- High-density fiber cassette for use with Tripp Lite N482-01U and N482-02U fiber enclosure panels
- 3 yellow built-in 2-meter 8-fiber MTP singlemode cables
- Connect up to 12 LC duplex fiber cables with 3 8-fiber MTP/MPO connections
- Recommended for use with QSFP fabric switches to support 4 lanes parallel to 40 GB
- Supports 40 GbE internally using 9/125 singlemode fiber optic cable
Simple Fiber Installations Save Time and Money
- Easy installation with no tools required
- Install up to 14 cassettes in N484-02U 2U chassis
- Install up to 5 cassettes in N484-01U 1U chassis
Easy to Modify, Upgrade or Expand Fiber Infrastructure By Adding or Swapping Cassettes
- Complies with IEEE 802.3ae (10 GbE) and ANSI T11.2 (Fibre Channel) requirements
- 0.35 dB maximum insertion loss falls under IEEE 802.3ae maximum channel loss spec of
- Supports devices of varying speeds, including 10 GB and 40 GB network equipment
Premium Construction for Optimal Performance
- Factory-terminated connectors reduce time and labor
- Dust caps protect unused ports
Tripp Lite Preloaded Fiber Panel 2x 24F MTP/MPO to 12x LC F/M OM4 MMF 20M
1U panel comes preloaded with spools of multimode fiber cable that allow you to extend the exact length required and store the excess out of sight.
Description
Preloaded Fiber Panel, 1U - 2x (24F MTP/MPO-PC to 12x LC Duplex F/M) 24F Trunk Cables, OM4 Multimode, 20 m (65.6 ft.)
Features
1U Panel Solution Comes with Cabling Preloaded to Cut Costs and Save Time
All necessary cabling is included with this preloaded fiber panel, coiled inside and ready for immediate use. The aluminum 1U chassis features two 24-fiber MTP/MPO-PC to LC Duplex multimode trunk cables, both 20 meters (65.6 feet) in length to make management easy. The panel opens to provide easy access to stored cables. Use only as much cabling as you need. The remainder stores inside the chassis to eliminate cable clutter, allow better airflow through the rack and make equipment maintenance and replacement easier. The cables and panels have labels to help with organization. You also avoid the expense and effort of custom cabling. The flexibility in cable length lets you reuse the cables if equipment is moved. The N48M-2M24L12-20 mounts in just 1U of space in an EIA-standard 19-inch rack.
- Dual MTP/MPO-to-LC 24-fiber OM4 multimode cables come coiled inside for instant use
- Use only as much cable as you need; store the remainder inside to avoid clutter
- Flexible cable length allows reuse of cables if equipment is moved
- Aluminum chassis mounts into 1U of space in EIA-standard 19 in. racks
Tripp Lite 24-Port Shielded Cat6 Patch Panel Feed Through Rackmount RJ45 1URM TAA
Tripp Lite's 24-Port Shielded Cat6 Feed-Through patch panel provides patching without punching down bulk wire to the back of the panel. Fully meets or exceeds Cat6 specifications - works with USOC, T568A, and T568B wiring. 19" width mounts easily in 2-Post Relay Rack, or a Wall-Mount Hinged Rack. Detachable cable management bar keeps patch cables neat and tidy on the back of the panel. Easy screw down strain relief eliminates the need for nylon or velcro cable ties. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
- Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
- Cable management bar keeps patch cables well-ordered
- Installs easily in 19" racks or wall-mounts
- Shielded Cat6 RJ45 Jacks on both sides of the panel
StarTech.com 24 Port 0.5U Cat5e Patch Panel – RJ45 Ethernet Rackmount Cat 5e 110 Patch Panel
The PANELHU24 Rack Mount Cat5e patch panel condenses 24 ports into a 0.5U panel, making it an ideal solution for smaller installations.
Color coded for both T568A and T568B wiring, this network patch panel provides the perfect solution for any voice or LAN application and offers dual type IDC termination. For convenience, the port numbers are clearly marked on the front of each RJ45 port, offering a quick and easy way to identify cable runs.
Durably constructed of only top quality materials, this 24-port Ethernet patch panel is backed by StarTech.com's 2 year warranty.
- Color coded for both T568A and T568B installations
- Dual-type IDC headers, situated 180? relative to the RJ45 ports, terminated using 110-type punch tool
- Meets and exceeds ANSI/TIA-568-C.2, ISO/IEC 11801 and EN 50173-1 specifications
- High impact plastic housing, flame retardant UL 94V-0
Eaton Tripp Lite Series 12-Port Wall-Mount Patch Panel for UTP Keystone Jacks, Offset Ports, TAA
Manages and organizes input/output network cable connections in your small network closet, including audio/video, VoIP, Ethernet and USB.
Manages and Organizes up to 12 Cable Connections
This 12-port patch panel is ideal for wall mounting in small network closets or near a desk or workspace. Twelve blank offset cutouts accommodate almost any standard keystone jack, including RJ45 Ethernet, HDMI and USB. Ports are numbered and labeled to help you identify individual cable runs at a glance.
Designed for Easy Custom Installation
The 12-port patch panel mounts to a wall, desk or similar flat surface in either horizontal or vertical mode, so you can easily organize inputs to your specific requirements. It easily snaps into and out of the frame, allowing you to remove it to make new connections and snap it back into place.
TAA-Compliant for GSA Schedule Purchases
The N062-012-KJ-WOF is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
- 12 blank cutouts accommodate all UTP keystone jacks, including RJ45, HDMI and USB
- Installs on a wall vertically or horizontally with included mounting bracket
- Ports are numbered and labeled for at-a-glance connection identification
- Recommended for AV, VoIP, Ethernet and other applications in small network closets
- Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
Eaton Tripp Lite Series 12-Port Cat6a Wall-Mount Patch Panel – PoE+ Compliant, 110, 568A/B, RJ45 Ethernet, Offset Ports, TAA
12-Port Patch Panel Manages and Organizes Cat6a Network Cabling
This patch panel enables quick, easy cable patching. Just plug Cat6a patch cables into its 12 front RJ45 ports, and use a 110 punch-down tool to terminate color-coded connections in the rear. Both the offset RJ45 ports and 110 terminals are clearly numbered, and the front ports have blank labels to help you identify individual cable runs. The N250-012-6A-OF supports EIA/TIA 568A and 568B wiring standards and is compatible with all network applications.
Specifically Designed for Use in Power over Ethernet Plus (PoE+) Applications
This Power over Ethernet patch panel maximizes performance with Type 2 PoE+ applications. It prevents spark-gap erosion that degrades the plug and jack contacts over time and can affect data and/or power transmission capabilities. The N250-012-6A-OF is designed to handle the frequent mating and unmating of surveillance cameras, VoIP phone systems, wireless access points and other PoE and PoE+ devices under electrical load.
Effortlessly Mounts to a Wall Using the Included Frame
The 12-port patch panel mounts to a wall, desk or similar flat surface in either horizontal or vertical mode, so you can easily organize inputs to your specific requirements. The patch panel easily snaps into and out of the frame, allowing you to remove it to make new 110 connections and snap it back into place. Included cable ties help organize your connections and cut down on cord clutter.
TAA-Compliant for GSA Schedule Purchases
The N250-012-6A-OF is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
- PoE+ patch panel prevents spark-gap erosion that can affect transmission
- 12 offset RJ45 and 110 ports numbered/labeled for immediate cable identification
- Panel easily snaps out of the frame for new connections, then snaps back into place
- Supports EIA/TIA 568A/B wiring standards for 110-type terminations
- Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
Tripp Lite Cat6 PoE Patch Panel 24-Port 110/Krone 568A/B RJ45 1URM TAA
24-Port Patch Panel Manages and Organizes High-Density Cat6 Network Cabling
This patch panel enables quick, easy cable patching. Just plug Cat6 cables into its 24 front RJ45 ports, and use a 110 or Krone punch-down tool (do not use a 4/5 pair 110 punch-down tool) to terminate color-coded connections in the rear. Both the front and rear connectors are clearly numbered, and the front ports have blank labels to help you identify individual cable runs. The N252-P24 supports EIA/TIA 568A and 568B wiring standards and is compatible with all network applications.
Specifically Designed for Use in Power over Ethernet Plus (PoE+) Applications
This Power over Ethernet patch panel maximizes performance with PoE+ applications. It prevents spark-gap erosion that degrades the plug and jack contacts over time and can affect data and/or power transmission capabilities. The N252-P24 is designed to handle the frequent mating and unmating of surveillance cameras, VoIP phone systems, wireless access points and other PoE and PoE+ devices under electrical load.
Mounts in 1U of Space in Your 19 in. Enclosure or Open Frame Rack
The high-density patch panel supports mounting in 1U of space in EIA-standard 19-inch racks. Included cable ties and a removable cable management bracket help organize your connections, cut down on cord clutter and maintain stable performance.
TAA-Compliant for GSA Schedule Purchases
The N252-P24 is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Lifetime Warranty
The N252-P24 is backed by a lifetime warranty, ensuring reliability and performance.
Typical Applications
- Patch cables to PoE+ devices mounted in areas that are difficult to reach or have no electrical outlets
- Add routers, switches, wireless access points, security cameras, sensors and other PoE+ devices to an Ethernet network configuration
- Power over Ethernet patch panel prevents spark-gap erosion that can affect transmission
- 24 RJ45 and punchdown ports numbered/labeled for immediate cable identification
- Mounts easily into 1U of space in your EIA-standard 19 in. rack for immediate use
- Supports EIA/TIA 568A/B wiring standards for either 110 or Krone-type terminations
- Ideal for managing Cat6 cable patching in high-density IT environments
Black Box CAT5e Feed-Through Patch Panel – 1U, Shielded, 48-Port
This Black Box Cat5e feed-through patch panel provides high density and easy patching solutions in data centres. The Ca5e patch panel is designed for use in 19" racks and bundles the networks together to connect incoming and outgoing lines and improve the organisation of a wired network. This network patch panel enables quick and easy identification of cable runs, and the detachable cable management bar keeps cables neat and tidy.
- Cable management bar helps support cables attached to the rear of the panel
- Ideal for locating desktop concentrators or hubs on a 19" rack
- Meets Category 5e performance requirements
- Feed-through connectors provide super-easy cable management
- Sturdy panel for high-density applications in relay racks or communications cabinets
- Provides patching without punching down the wires to the ports
- Total 48 CAT5e RJ-45 to RJ-45 feed-through ports
Tripp Lite 48-Port Cat6 Cat5 Patch Panel Rackmount 110 Punch Down RJ45 Ethernet 1URM 568B
- Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
- 110 type punchdown termination
- EIA/TIA 2/32 spacing
- 2U ( 3.50" ) High
- 19-in. rackmount ready
Tripp Lite 24-Port Shielded Blank Patch Panel RJ45 USB HDMI Cat5e/6 1URM
The N062-024-KJ-SH 24-Port 1U Rack-Mount Shielded Blank Keystone/Multimedia Patch Panel manages and organizes the cabling in your network. The 24 blank cutouts accommodate all Tripp Lite keystone jacks, and some other keystone jacks in the market, including RJ45 Ethernet, HDMI audio/video, voice and USB applications. The rear cable manager keeps cables neat, tidy and efficiently organized on the back of the panel. Ports are clearly numbered to help you identify connections. Mounts easily into 1U of an EIA-standard 19-inch two-post rack or wall-mount rack enclosure. Made from fully shielded, heavy-duty steel. Grounding wire included.
Manages and Organizes a Wide Variety of Cabling
- 24 blank cutouts accommodate all Tripp Lite keystone jacks, and some other keystone jacks in the market
- For use with RJ45 Ethernet, HDMI audio/video, voice, USB and other applications
- Ports are numbered for easy connection identification
- Fully shielded, heavy-duty steel construction
Cable Manager on Rear
- Keeps cabling neat, tidy and organized
Quick, Easy Installation
- Mounts easily into 1U of EIA-standard 19 in. 2-post rack or wall-mount rack enclosure
- Includes grounding wire
- 24 blank cutouts compatible with all Tripp Lite keystone jacks
- Fully shielded, heavy-duty steel construction
- Rear cable manager keeps cables organized
- Numbered ports for easy connection identification
- Mounts into 1U of EIA-standard 19 in. 2-post or wall-mount rack
Tripp Lite 12-Fiber Patch Panel 2 MTP/MPO to 12 LC 10Gb Breakout Cassette
Guaranteed compatibility when used with recommended Tripp Lite cabling. Designed specifically for use with Tripp Lite cables, such as the N820-, N821- and N844-Series cables
- Max insertion loss of 0.35dB falls well under the IEEE 802.3ae maximum channel loss spec of <25dB
- Complies with IEEE 802.3ae (10GbE) and ANSI T11.2 (Fibre Channel) requirements
- Internal OM4 wiring
- Factory terminated connectors reduce the time and labor required of field connector terminations
- 40Gb to 10Gb Breakout Cassette, with (x12) LC connections to (x2) 12-Fiber MTP/MPO connections
- High Density Fiber Cassette for use with Tripp Lite N482-01U and N482-02U High Density Fiber Enclosure Panels