product introduction :
1.Power supply:ac90–275v,50–60hz
2.Power consumption:75w
3.Fixing lamp:led 75w
4.Beam angle: 25-30 degrees
5.Dmx-control-channels:10/13 dmx channels
6.Pan: horizontal 540 °
7.Tilt: vertical 270 °
8.P/t fine: 8-16bit
9.Prism: 3-face rotatable prism
10.Focusing: electronic linear focusing from near to far
11.Shuttle:flash rate:0–16hz
12.Dissipate heat: air / convective heat transfer
13.Dimmer:0-100% mechanic dimmer
14.Long lifespan leds(more than 60,000 hours)
15.Color wheel:7 colors + blank
16.Gobo:7 patterns + blank, 2 of which are glass patterns
17.Data input and output: 3-core xlr plug audio socket
.Use of premises: scenarios, discos, disco, hotels, shops, family birthday party, good for dj, etc.
specification:
1.Size: 27×16.5x21cm
2.Weight: 3.5kg
3.Packing size: 25.5×31.5x20cm
4.Package weight: 4.05kg
package contents:
1xled gobo 75w lighting
1xdmx cables
1x power cord plug
1x user manual
1x steady
press ‘menu’, enter menu→press ‘enter’ at least 3 seconds, menu interface will show ‘pan‘(fine tuning in x axis)’→by addition and subtraction keys to select tilt(fine tuning in y axis) , ‘colo(fine tuning in color plate)’, ‘gobo(fine tuning in gobo plate), ‘pris(fine tuning in prism)’, ‘stem(temperature setting(when fans starts))’→press ‘enter’, then adjust motor position when value range between -127—127→press ‘enter’ to save the value what you adjusted in last step(‘stem’ is temperature setting(when fans starts), default 45°)
ps: after the machine connect the threshold ntc-10k, the menu temp can show the temperature of leds aluminum sheet, the system will automatically reduces power (maximum to 75% of the original); if the temperature still rise to 80°, system will automatically cuts off the led, and automatically turns on again when the temperature cools to 69° or below.Fans can be set the start threshold in menu ‘stem'(default 45°, maybe have error 1—2° because of the different voltage of fans.), speed of fans will increase by 10% when temperature rises by 1° every time; the system forces fans to work when the temperature reaches
Reviews
There are no reviews yet.