- Rackmount Kit allows you to effectively utilize most of the space available with maximum dependability
- Switch application/usage offers maximum reliability with dependable performance
Cisco Nexus 9408 Rack Mount Kit
$502.50
- Rackmount Kit allows you to effectively utilize most of the space available with maximum dependability
- Switch application/usage offers maximum reliability with dependable performance
9999 in stock
Weight | 1.0000 kg |
---|---|
Dimensions | 0.00 × 0.00 × 0.00 cm |
Brand Name |
Cisco |
Product Type |
Rackmount Kit |
Product Name |
Nexus 9408 Rack Mount Kit |
Manufacturer |
Cisco Systems, Inc |
Manufacturer Part Number |
N9KC9400RMK |
MPN |
N9K-C9400-RMK |
Related products
Tripp Lite Portable Cooling Unit / Air Conditioner 12K BTU 3.5kW 120V 60Hz – Gen 2 Update
Tripp Lite's award-winning SRCOOL12K, now in its second generation, is a portable, compact, self-contained air conditioning unit designed for server rooms, small network closets, back offices and other areas with heat-sensitive equipment that facility air conditioning can't reach. Design improvements based on customer feedback include upgraded commercial-grade components designed to last longer, including an upgraded hot air exhaust fan. The SRCOOL12K Gen 2 also boasts robust packaging for better protection from shipping damage and an updated two-year warranty. This SmartRack® server rack cooling unit pumps 12,000 BTU (3.5kW) of cooling into your IT environment to help prevent shutdowns, malfunctions and other failures caused by overheating or fluctuating temperatures. It uses environmentally friendly R410A refrigerant to comply with worldwide standards. An easy-to-read control panel with diagnostic LEDs provides convenient local management. Close-coupled cooling delivers cold air near heat loads to discourage recirculation and increase energy efficiency. An included 71-inch flexible hose lets you aim the cold air to a specific spot, such as an overheated rack enclosure or an equipment hot spot. Hot air exits through a window or drop ceiling via an included exhaust kit. An upgraded hot air exhaust fan maintains effectiveness even under a high heat load. The unit also dehumidifies and filters the air, providing better air quality that can enhance operating conditions and equipment reliability. With a 100-percent duty cycle, the SRCOOL12K can run continuously without costly downtime. It uses copper tubing that is stronger than the aluminum tubing used in most consumer cooling units. The copper allows higher pressures and better weld joints to stand up to the constant vibration of the running compressor. The evaporator expels the condensed water through the directional exhaust duct, eliminating the need for a drain tube, drain pan or water collection tank and saving you time and money. No external condenser, refrigerant piping or professional maintenance is required for simple operation. Upgraded firmware allows the compressor to cycle on and off while the evaporator fan stays on to prevent icing in high-humidity environments. Install the optional SRCOOLNETLX network module (sold separately) to monitor temperatures, receive alerts, review logs and control settings from anywhere, anytime, via SNMP, web browser, SSH, telnet or command line interface. The built-in LX Platform's PowerAlert® Device Manager provides a single interface to cycle the connected air conditioner on and off, adjust its fan speed, change its target set point temperature and switch to dehumidification mode. The self-contained SRCOOL12K requires no disruptive construction projects or costly service calls from plumbers or HVAC specialists.
- 2-year limited warranty
- 100% duty cycle keeps your equipment constantly cool with no downtime
- Self-contained design with no plumbing or special circuits-easy setup by almost anyone
- Built-in evaporator for drip-free operation-no need to empty water collection tanks
- Filters and dehumidifies air to further enhance equipment performance
- 12,000 BTU (3.5kW) of cooling capacity protects vital equipment against overheating
Tripp Lite Rack Enclosure Cabinet Standard Sliding Shelf 50lb Capacity
Tripp Lite's SmartRack SRSHELF4PSL is a standard sliding shelf for installation in rack cabinets. The SRSHELF4PSL has a 28.5 in. / 72.4cm depth (29.5 in. / 74.9cm including handle) and can support up to 50lbs. This fully extendible shelf can accomodate tower units, monitors and other equipment. It is designed for 4 post rack mounting and the required mounting hardware is included. Expandable mounting rails supports installation in racks with front to rear rail distances between 28 in. / 71cm minimum and 46 in. / 117cm maximum.
- Extendable shelf accommodates tower units, monitors, and other equipment
- Designed for 4 post rack mounting
- 28.3 in. / 72cm shelf depth, supports up to 50 lbs.
- Sliding Shelf mountable rack accessory
Tripp Lite 48-Port Cat6 Cat5 Patch Panel Rackmount 110 Punch Down RJ45 Ethernet 1URM 568B
- Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
- 2U ( 3.50" ) High
- 110 type punchdown termination
- EIA/TIA 2/32 spacing
- 19-in. rackmount ready
Tripp Lite Rack Enclosure Horizontal Cable Manager (finger duct) 1URM
Tripp Lite's SmartRack SRCABLEDUCT1U helps eliminate cable stress for your rack enclosure cabinet. The 1U 19-inch horizontal cable manager (finger duct with cover) organizes cables within the SmartRack enclosure or open rack. Required mounting hardware is included.
- Required mounting hardware included
- Cold rolled steel with black finish
- Organizes cables within SmartRack enclosure or open rack
- Helps eliminate cable stress
- 1U 19-inch Horizontal Cable Manager -finger duct with cover
StarTech.com 2U Adjustable Mounting Depth Vented Sliding Rack Mount Shelf – 50lbs / 22.7kg
Offering a weight capacity of up to 50 lbs (22.7 kg), the sliding rack shelf features a ventilated, cold-rolled steel shelf on two locking adjustable rails which allow the shelf to be installed into cabinets or racks with mounting depths from 20in (510mm) to 30in (744mm). The locking feature locks the shelf 3/4 of the way out, preventing the shelf from accidentally falling out of the rack or sliding back in before maintenance is complete.
Backed by a StarTech.com lifetime warranty.
- Adjustable rails offer compatibility with almost any server rack or cabinet
- Simple sliding and locking mechanism makes it easy to access anything even deep on the shelf
- Ventilated shelf design improves air flow and helps lower temperatures in the rack
Tripp Lite Rack Enclosure Cabinet Heavy Duty Fixed Shelf 250lb Capacity
Tripp Lite's SmartRack SRSHELF4PHD accommodates tower units, monitors and other equipment. The fixed heavy-duty shelf offers 25.5 inches of shelf depth and supports up to 250lbs. SRSHELF4PHDis designed for 4 post rack mounting. Required mounting hardware is included.
- Required mounting hardware included
- Accommodates tower units, monitors, and other equipment
- Cold rolled steel with black finish
- 25.5 inch shelf depth (fully closed) / 40.75 inch shelf depth (fully open)
- Fixed Heavy-Duty Shelf supports up to 250 lbs.
- Designed for 4 post rack mounting
C2G 48-Port Cat6 110-Type Patch Panel
This high density 19-inch 2RU panel design lets you mount in any standard 19-inch rack or cabinet, accommodates top, bottom or side cable entry, and also saves valuable space in your rack.
The 48-Port Cat6 110-Type Patch Panel enables effortless installation with easy identification vibrant color labels for 568 A or B specifications. Each terminal offers a wide 110 termination layout and a write-on designation label with a clear holder on the front and numbering on both the front and back to provide a quick, easy way to identify cable runs.
- Designed to support Cat6 cabling infrastructure
- Large, highly visible labels for 568A and 568B wiring schemes
- Meets or exceeds EIA/TIA TSB-40 Cat6 specifications
- Modular 110 punch down block termination
Black Box Snagless Boot – Green, 50-Pack
Like the RJ-45 cable you already have but want to make it easier to identify? Use ColorCoded Snagless Pre-Plugs. Choose from 11 colors in packs of 50. Our Color-Coded Snagless Pre-Plugs make cable management and identification a snap!
- Guaranteed for life!
- Pre-plugs must be installed before the cable is crimped.
- The pre-plugs are rubber boots that go over the connector to protect its tab during frequent installing or uninstalling.
- Use with any RJ-45 modular cable.
- Simplify cable management, identification, and troubleshooting.
Reviews
There are no reviews yet.