Rack Equipment

Space-Saving 9U Wall-Mount Enclosure Houses 19 in. Rack Equipment up to 20.5 in. Deep

This SmartRack® cabinet is designed to house 9U of equipment, such as network switches and patch panels. It's recommended for network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds.

Lockable for Simple and Secure Equipment Access

The front door and side panels lock securely to help prevent damage, tampering or theft. The reversible front door can open left or right by rotating the cabinet 180 degrees before mounting. Convenient top and bottom access ports allow easy cable routing through the cabinet.

Generous Airflow Keeps Equipment Cool

Round ports built into the top, bottom and both sides are designed for optional ventilation fans (such as Tripp Lite's SRFANWM, sold separately) that keep your equipment cool and functioning at their peak.

Designed with Extra Width for Easier Cable Access and Better Airflow

The SRW9UDPGVRT is three inches wider than Tripp Lite's standard-width wall-mount racks. Combined with two vertical cable managers with pre-installed finger ducts in front and two cable pass-through ports on top, the extra width provides convenient cable management along the front of the rack. This allows easier cable access from the front and increases airflow by minimizing rear cable clutter that can obstruct vents. Cutouts on top of the rack can be used to secure cable bundles.

Shatter-Resistant Clear Acrylic Front Window

The front door features a shatter-resistant clear acrylic window that lets you monitor equipment readouts without unlocking the enclosure. Not only does the window help prevent equipment tampering and reduce acoustic noise, it also adds visual flair to your IT installation.

Easy Enclosure and Equipment Installation

This 9U server rack comes fully assembled and ready to mount to the wall with user-supplied hardware. The side panels can be removed for convenient installation, maintenance and replacement of equipment. In addition to 9U horizontally, the cabinet can accommodate an additional 2U vertically on both the left and right sides for a total of 13U. Front and rear mounting rails adjust independently to accommodate equipment up to 20.5 inches deep, including network switches and patch panels.

Meets Payment Card Industry Standards

The SRW9UDPGVRT provides physical equipment and media security required for PCI DSS (Payment Card Industry Data Security Standard) compliance.

Typical Applications

• Store and organize rack-mount equipment in a network wiring closet, retail location, classroom, office or other area where you need equipment to be secure

• 9U rack constructed from powder-coated steel that stands up to tough environments
• Doors and side panels lock securely to help prevent damage, tampering or theft
• Extra 3 in. width and internal cable managers cut down on rear cord clutter
• Ships fully assembled for immediate wall-mounting with user-supplied hardware
• Provides physical equipment and media security required for PCI DSS compliance

The Intellinet Network Solutions 19" shelves are the ideal accessory for your server and network installations. Choose from four versions, suitable for every need: fixed, cantilever, heavy-duty (up to 100 kg) or sliding. Beyond that, you have flexibility with depths that range from 150 mm to 900 mm and a choice of black (RAL9005) or Grey (RAL7035).

• Secures 18U of 19 in. rack equipment up to 32.5 in. deep
• Flow-through ventilation keeps equipment cool
• Locking steel cabinet vented at sides, top and bottom
• Maximum load capacity of 500 lb.

Ensure your equipment is secure

The durable rack mount tray can hold up to 20 kg (44 lbs.) of equipment and is constructed using SPCC commercial-grade cold-rolled steel.

Make the most of your available space

The 1U cantilever shelf lets you optimize your working space by giving you the ability to mount equipment to your 19-inch rack instead of taking up desk or floor space. It's perfect for your SOHO (small office, home office) environment, server room, data center or any other location with limited space available.

Customize your setup

You can install the 1U network cabinet shelf in your rack at any height, giving you a stable surface for placing equipment that's un-mountable such as a computer, or for storing your tools.

The Choice of IT Pros Since 1985

StarTech.com conducts thorough compatibility and performance testing on all our products to ensure we are meeting or exceeding industry standards and providing high-quality products to IT Professionals. Our local StarTech.com Technical Advisors have broad product expertise and work directly with our StarTech.com Engineers to provide support for our customers both pre and post-sales.

The CABSHELF116 is backed by a StarTech.com lifetime warranty and free lifetime technical support.

• UNIVERSAL 19"" FIT: This 1U server rack shelf is designed to fit any 19" wide server rack or enclosure including major brands like APC, Dell, Lenovo, HPE and can accommodate your data, IT, networking or other equipment up to 16" (41cm) deep
• HEAVY-DUTY & DURABLE DESIGN: Constructed with SPCC commercial cold-rolled steel, the sturdy front mounted cabinet shelf ensures long term durability and supports a total weight of 44lbs/20kg making it the perfect rack shelf solution for any environment
• FLEXIBLE INSTALLATION: The rack mount cantilever shelf can be mounted in 2 orientations, install the shelf with the front shelf lip downwards or mount with the lip upwards to prevent your computer, AV or other equipment & accessories from sliding off
• VERSATILE FUNCTIONALITY: At 16in deep, this fixed rackmount shelf is designed to work with any 19 inch cabinet or equipment rack; it provides additional storage space for mission critical hardware, and can even store your tools or audio/video accessories
• INDUSTRY-LEADING SUPPORT: Backed for life by StarTech.com and free lifetime technical support on this TAA compliant 1U solid server rack shelf/tray, and has been the choice of IT professionals and businesses for over 30 years

Features

Rack-Mount Drawer for Storing Essential Rack Equipment Accessories

• Keeps tools, cables, notes, computer discs, etc. at your fingertips
• Ideal for quick storage in data center, wiring closet and back office racks
• Maximum load capacity of 50 lb.

Heavy-Duty Steel Construction Designed for Long Life

• Made from durable cold-rolled steel with black powder-coated finish
• Slides smoothly out of the way into rack when not in use
• Locks securely with included keys to protect contents

2U Drawer Mounts in EIA-Standard 19 in. 2- or 4-Post Rack

• Mounting hardware included for quick installation

• Rack-Mount Drawer for Storing Essential Rack Equipment Accessories
• Keeps tools, cables, notes, computer discs, etc. at your fingertips
• Ideal for quick storage in data center, wiring closet and back office racks
• Maximum load capacity of 50 lb.
• Heavy-Duty Steel Construction Designed for Long Life
• Made from durable cold-rolled steel with black powder-coated finish
• Slides smoothly out of the way into rack when not in use
• Locks securely with included keys to protect contents
• 2U Drawer Mounts in EIA-Standard 19 in. 2- or 4-Post Rack
• Mounting hardware included for quick installation

• Preinstalled cooling fan with filter promotes ample airflow
• Fully assembled and ready to mount to wall, floor or table
• Locks securely to help prevent damage, tampering or theft
• Vertical mounting rails adjust from 1 to 16 in. deep
• Maximum load capacity of 60 lb.

This server rack provides 24U of storage space in a sleek, secure cabinet for storing standard 19" rack-mount devices such as Dell®, HP® and IBM® servers, along with telecommunication and A/V equipment. The rack is compatible with EIA-310 compliant equipment and supports a total load capacity of 450 kg (992 lb.).

Hassle-free equipment installation

This rack includes a variety of features that enable you to easily incorporate plenty of equipment. With adjustable mounting rails, you can easily change the rail depth from 2" up to 30" (76.2 mm - 780 mm) to ensure compatibility your standard rack-mount equipment. The added depth also provides support for additional cable and power management behind your equipment. For hassle-free cable management, the rack includes a 3 meter roll of hook-and-loop cable tie that makes it easy to keep your cables neat and tidy by binding them together or binding them to the rack. The self-gripping fabric can be cut to any size, enabling a wrap-around solution for the cables of any rack-mount equipment.

The rack features holes with covers on the ceiling and floor panels that make it easy to run cabling to the inside and outside of the cabinet, for discreet cable management. The rack also features grounding lugs that enable you to ground your equipment for added protection. This rack also includes a 1U shelf that gives you a stable surface for placing equipment that's not rack-mountable or storing your tools.

To provide hassle-free deployment the rack ships fully assembled.

Securely protect your equipment

To keep your rack-mounted equipment secure, this rack features front and rear locking mesh doors. The mesh doors look great in any server room and help provide passive cooling. The doors are also reversible, which gives you the freedom to choose which side of the rack the door opens from, to suit your server room's spatial requirements.

The rack also has removable side panels with independent quick-release locks that enable you to access your equipment easily, while still keeping it secure.

Maximum Maneuverability, with casters included

The cabinet features casters for hassle-free access to rear-mounted equipment while providing ease of mobility around your office, studio or server room. Plus, the width and height of the rack fit through standard doorways, giving you the freedom to wheel your server rack into different rooms.

The RK2433BKM is backed by a StarTech.com 5-year warranty and free lifetime technical support.

• SECURE RACK: 19" server rack cabinet w/adjustable mounting depth up to 30" , internal depth of 33" , height 46.1"; Locking doors/sides (2 keys inc.); Rolling/Mobile data/IT/enclosure
• FULLY ASSEMBLED WITH CASTERS: Pre-built w/casters & levelling feet to offer manoeuvrability & stability; 100 Cage nuts/screws, hook & loop tape & 1U shelf provided to easily mount equipment
• DESIGN AND VENTILATION: Strong mesh doors and side panels with vented top allow for airflow; 1U height intervals marked for identification
• COMPATIBILITY: EIA/ECA-310-E Compliant for server/networking equipment; Compatible with brands like HPE ProLiant, Dell PowerEdge, and Lenovo ThinkSystem
• Specs: 24U 19in Enclosure Cabinet
• Mounting Depth 2 to 30in.
• 995 lb stationary capacity
• 100xM6 cage nuts & screws
• 1U vented shelf
• 10ft hook and loop tape inc.
• Grounding lugs

SANUS Component Series CFR1620 AV rack can support up to 600 lbs of AV gear on the floor and up to 200 lbs when mounted on the wall. Its modular, stackable structure can be coupled into five different height combinations - 40U, 35U, 30U, 20U and 15U. The rack and all of its components ship in one UPS box. The CFR1620 is a self-aligning rack and can be assembled in just 15 minutes. Compatible with the SANUS EcoSystem™.

• Rack Frame allows quick and easy retrieval of your items with better organizing and feasible mounting
• A/V Equipment application/usage for better interactivity with added efficiency
• Comes in Black color to better suit your theme and style

45U rack cabinet houses, organizes and secures extra-deep standard-width rack equipment in highdensity server and IT networking areas.

Extra-Deep Server Cabinet Accommodates 45U of Standard-Width Rack Equipment
Designed for network wiring closets, retail locations, classrooms, back offices and other areas with essential rack-mount IT equipment, this SmartRack® 45U rack enclosure is 48 inches (1219 millimeters) deep. This allows high-density equipment installations, extra space for cable management, and room for removing hot-swap power supplies from the rear of mounted devices. Constructed from heavy-duty steel with a durable black powder-coated finish, the SR45UBDP48 has a maximum stationary load capacity of 3000 pounds (1361 kilograms) and a maximum rolling load capacity of 2250 pounds (1021 kilograms).

Keeps Important Equipment Secure and Easy to Access
The reversible front door, split rear doors and half-size side panels lock securely to help prevent damage, tampering or theft. The doors, side panels and top panel are designed for quick release, making it easy to access connected equipment and cabling with little effort. Convenient top access ports and an open bottom allow easy cable routing through the cabinet. The vented doors allow generous airflow from front to rear to keep your equipment cool and functioning at its peak.

Easy Enclosure Deployment and Equipment Installation
This 45U server rack comes fully assembled for quick and easy deployment with pre-installed casters that let you maneuver it over a level, smooth, stable surface and through a standard seven-foot doorway into position, where it can be stabilized by adjusting the levelers. Four mounting rails adjust in quarter-inch increments from four to 42 inches. Two rails also support toolless 0U mounting for quick installation of up to four compatible PDUs and vertical cable managers to help cut down on clutter.

Designed for Baying Multiple Enclosures in a Row
Built-in baying brackets and removable side panels allow the combination of two or more rack cabinets in a row for cost-effective, orderly and efficient expansion. Center-to-center width can be set at 24 inches (600 millimeters) to match standard data-center floor tiles.

Meets Payment Card Industry Standards
The SR45UBDP48 provides physical equipment and media security required for PCI DSS (Payment Card Industry Data Security Standard) compliance. This is essential for companies that process, store and/or transmit credit card information.

• 45U rack constructed from powder-coated steel that stands up to tough environments
• Mounting rails accept standard-width rack equipment up to 48 in. (1219 mm) deep
• Doors and side panels lock securely to help prevent damage, tampering or theft
• Ships fully assembled for quick deployment on pre-installed casters
• Provides physical equipment and media security required for PCI DSS compliance
• 5-year limited warranty

• Easy to assemble with included hardware
• Heavy-duty steel construction designed to last
• Configures to 8U, 12U or 22U of rack space
• Secures 19 in. rack equipment up to 11.5 in. deep
• Maximum load capacity of 150 lb.

This 18U server or network rack cabinet lets you mount your EIA-310 compliant equipment to the wall, in a secure enclosure that has a hinged rear door for easy access to your equipment. The enclosure features adjustable mounting depth from 2.4 to 20 in. to provide a robust storage solution for your rack-mount equipment.

To provide secure stability for your heaviest equipment, this rack offers 4-post mounting, supporting a higher weight capacity per U than 2-post racks and supporting a total load capacity of up to 200 lb. (90 kg).

Save valuable floor space by wall-mounting the enclosure. The wall-mounted design makes this enclosure the ideal solution for optimizing equipment storage in your classroom, retail store, server room or office. This rack also includes a 1U shelf that gives you a stable surface for placing equipment that's not rack-mountable or storing your tools.

The wall-mount network rack makes it easy to access your equipment and cabling, with a rear hinge that swings the enclosure away from the wall. By flipping the enclosure 180 degrees upon installation, you can reverse the direction of the hinge so that the enclosure can swing open from left or the right, depending on your preference.

The 18U network cabinet features a removable and reversible front door and removable side panels, each with quick-release mechanisms, so you can easily access your equipment. Plus, each door and panel on this rack features an independent lock, ensuring your equipment is secure.

For hassle-free cable management, the rack includes a 3 meter roll of hook-and-loop cable tie that makes it easy to keep your cables neat and tidy by binding them together or binding them to the rack. The self-gripping fabric can be cut to any size, enabling a wrap-around solution for the cables of any rack-mount equipment.

This server rack enclosure features heavy-duty steel construction, with lockable doors at all entrances. For hassle-free equipment installation, the mounting rails on the rack can be switched for use with square holes and cage nuts, or tapped rails.

To ensure your equipment is running at an optimal temperature, the server rack/cabinet promotes passive cooling. It features mesh doors and vented top and bottom panels for maximum airflow.

For simple and sturdy mounting, the rack's mounting holes are positioned 16 in. apart, so you can securely attach it to a wall using wall studs.

The RK1820WALHM is backed by a StarTech.com 5-year warranty and free lifetime technical support.

• CONVENIENT & SECURE ACCESS: Wall mount network cabinet w/ 180? hinged design provides easy lockable access to rear of mounted devices. Flexible enclosure also features removable doors & side panels.
• ACCESORIES INCLUDED: IT Data Rack includes complete set of accessories: a shelf (CABSHELFV1U), roll of hook-and-loop fastener, 50 cage nuts and screws, & 2 pairs of keys for the front and side panels
• STURDY CONSTRUCTION: 18U 19" EIA/ECA-310-E enclosed design, 200lb weight capacity, 16" deep with a max. 16" mounting depth, removable sides, locking reversible door, dual top cable hole, optional fans
• PRE-ASSEMBLED: This IT cabinet comes fully assembled out of the box and the included hardware allows for quick installation of server room rackmount or computer equipment without additional purchases
• DESIGNED FOR COOLING: The switch depth vented rack has mesh front doors and side panels to provide fresh airflow and supports active cooling with up to four optional 120mm fans (ACFANKIT12)

The Vertiv VR Rack VR3150 is a 42U server rack built with reliable engineering and is designed for simple and easy configuration. It has dimensions of 2000mm x 800mm x 1100mm (height, width, and depth), and has a deep frame that provides users around 2.5 inches more useable depth than similar sized racks. It has load capacities of 3,000 pounds static and 2,500 pounds dynamic. It is delivered ready for high density environments and supports a wide variety of equipment, including: servers, storage, PDUs, UPSs, console servers, and KVM switches. The zero U spaces in the Vertiv VR Rack have brackets and mounting holes for tool-less installation and removal of rack PDUs and cable management accessories. Each rack also comes with two sets of 19-inch EIA rails for sliding shelves, and the rack has split side panels with single locking slam latch that allows for easy single person installation and removal.

More from the Manufacturer

• 42U rack with load capacities of 3,000 pounds static and 2,500 pounds dynamic
• Modify this fully configurable rack cabinet to suit the needs of your network
• Frame design provides 2.5 inches more usable depth than a standard 19-inch rack cabinet
• Server enclosure dimensions (HxWxD): 2000mm x 800mm x 1100mm
• 42U server rack that supports: servers, storage, PDUs, UPSs, consoles, and KVM switches

The ADJSHELF Adjustable Mounting Depth Rack Mount Shelf offers a simple way to effectively organize mission critical computer hardware in your server racks and cabinets.

Compatible with all 19in (wide) server racks/cabinets, the fixed rack shelfcan be adjusted from 19in to 38in (mountdepth) as necessary. A sturdy cold-rolled steel construction provides long term durability and enables a weight capacity of up to 175 lbs (80 kg).

Backed by a StarTech.com 2-year warranty.

• Weight capacity up to 175 lbs (80 kg)
• Vented shelf plate to preserve airflow
• TAA compliant for GSA Schedule purchases
• adjustable mounting depth of 19"" -38""
• Low cost adjustable shelf for most 19 inch wide cabinets and racks

This server rack provides 12U of storage space in a sleek, secure cabinet for storing standard 19" rack-mount devices such as Dell, HP and IBM servers, along with telecommunication and A/V equipment. The rack is compatible with EIA-310 compliant equipment and supports a total load capacity of 450 kg (992 lb).

Hassle-free equipment installation

This rack includes a variety of features that enable you to easily incorporate plenty of equipment. With adjustable mounting rails, you can easily change the rail depth from 3" up to 30.7" (76.2 mm - 780 mm) to ensure compatibility your standard rack-mount equipment. The added depth also provides support for additional cable and power management behind your equipment. For hassle-free cable management, the rack includes a 3 meter roll of hook-and-loop cable tie that makes it easy to keep your cables neat and tidy by binding them together or binding them to the rack. The self-gripping fabric can be cut to any size, enabling a wrap-around solution for the cables of any rack-mount equipment.

The rack features holes with covers on the ceiling and floor panels that make it easy to run cabling to the inside and outside of the cabinet, for discreet cable management. The rack also features grounding lugs that enable you to ground your equipment for added protection. This rack also includes a 1U shelf that gives you a stable surface for placing equipment that's not rack-mountable or storing your tools.

To provide hassle-free deployment, the rack ships fully assembled.

Securely protect your equipment

To keep your rack-mounted equipment secure, this rack features front and rear locking mesh doors. The mesh doors look great in any server room and help provide passive cooling. The doors are also reversible, which gives you the freedom to choose which side of the rack the door opens from, to suit your server room's spatial requirements.

The rack also has removable side panels with independent quick-release locks that enable you to access your equipment easily, while still keeping it secure.

Maximum maneuverability, with casters included

The cabinet features casters for hassle-free access to rear-mounted equipment while providing ease of mobility around your office, studio or server room. Plus, the width and height of the rack fit through standard doorways, giving you the freedom to wheel your server rack into different rooms.

The RK1233BKM is backed by a StarTech.com 5-year warranty and free lifetime technical support.

• SECURE RACK: 19" server rack cabinet w/adjustable mounting depth up to 30" , internal depth of 33" , height 25.2"; Locking doors/sides (2 keys inc.); Rolling/Mobile data/IT/enclosure
• FULLY ASSEMBLED WITH CASTERS: Pre-built w/casters & levelling feet to offer manoeuvrability & stability; 50 M6 Cage nuts/screws, hook & loop tape & 1U shelf provided to easily mount equipment
• DESIGN AND VENTILATION: Strong mesh doors and side panels with vented top allow for airflow; 1U height intervals marked for identification
• COMPATIBILITY: EIA/ECA-310-E Compliant for server/networking equipment; Compatible with brands like HPE ProLiant, Dell PowerEdge, and Lenovo ThinkSystem
• SPECS: 12U 19in Enclosure Cabinet
• Mounting Depth 2 to 30in.
• 995 lb stationary capacity
• 50xM6 cage nuts & screws
• 1U vented shelf
• 10ft hook and loop tape inc.
• Grounding lugs

The 1U Monitor/Utility Shelf is a fixed shelf that can be mounted at any height within HP Racks to place a monitor or another component. Bezels for a 14" , 15" and 17" monitor are included. The Monitor/Utility Shelf is 19" (482.6 mm) wide and 29.13" (739.9 mm) deep with a load capacity of 150 lbs (68.1 kg).

Think Intellinet for all your rack and cabinet accessories.

Offering more versatility for any 19" cabinet or rack than the standard, fixed installation can, the Intellinet 19" Cantilever Shelf will help any network administrator create the best network infrastructure for their purposes. Made of rugged steel and coated in antistatic powder to help prevent electromagnetic interference with vital networking equipment, this shelf bolts to the front or back of your cabinet and provides easy access to the tools you need, right where you need them.

• Rack Shelf offers practical and convenient storage and organization solution that is adaptable to your space
• LAN Switch application/usage for better interactivity with added efficiency
• Rack-mountable Rack Shelf allows a clutter-free, convenient storage with increased efficiency
• Built with Steel material to offer great resistance to damage and deterioration
• Comes in Jet Black color to better suit your theme and style

Features you won't find elsewhere:

• Vented, End stiffeners Down
• Install in any rack hole (3 locations per U space)