Black Box MultiPower Miniature Transceiver/Media Converter
For extra versatility, you can power the Industrial MultiPower Media Converter through the external AC power supply included with each converter, using 5-50-VDC terminal block power, through the optional USB Power Adapter Cable (LHC021A), which plugs into a PC's USB port, or through the optional rackmount PowerTray (LHC018A-AC-R2).
You can even use multiple power options at the same time to provide maximum redundancy and ensure that your mission-critical applications remain up and running. For instance, you can connect a converter to power sourcing equipment (PSE) for PoE while also using AC adapter power, DC terminal block power, and USB bus power. Then, if any one of these power sources fails, the other sources will continue to supply power to the converter seamlessly.
You can also connect a PSE switch to an uninterruptible power supply to ensure that the switch and each connected media converter always have power.
The converter comes with DIN clips, so you can attach it to a DIN rail. When installing multiple Industrial MultiPower Media Converters on a DIN rail, use one DC input source, then cascade from one DC block to the next until you reach the maximum current available.
NOTE: The included AC power adapter doesn't work with the earlier version of this converter (LIC022A).
This product works with:
- USB Power Adapter Cable (LHC021A)
- PowerTray (LHC018A-AC-R2)
- Compliant to EN62368
- Extended temperature range when used with DC power: -13 to +158� F (-25 to +70° C)
- Includes clips for mounting on DIN rails
Transition Networks M/GE-xSW-SFP-01-xx-UxX Transceiver/Media Converter
Unidirectional media converters combine this one-way communications with the benefits of a copper to fiber media converter. Media converters are a cost-effective, plug-and-play device that allows fiber optic cabling to be connected to copper-based networking equipment. The deployment of fiber adds a layer of security to networks as it is difficult to tap into fiber and go undetected. If threats are attacking a network, the fiber links go down and network administrators are made aware of the problem, providing them the opportunity to address a potential breach of security.
Adding unidirectional technology to a media converter creates a physically secure one-way communication channel over fiber between a secure network and an unsecure network. These devices can be used to allow data from a classified, high-security area to be transmitted to a low-security area, while preventing unsecure data from re-entering the classified network. An alternate application allows a secure network to be updated with data from an external source while ensuring its critical data is unable to leave the classified area.
- Unidirectional data transmissions over fiber to, or from, secure networks
- Simplex communications only requires one strand of fiber cable
- Applications require a transmit-only converter to be paired with a receive-only converter
- Converters support dual speed 100/1000Mbps SFP modules offering great flexibility to meet network requirements
- Converters use duplex SFP modules but the transmitting converter only uses the TX port on the SFP, while the RX port is deactivated. Likewise the receiving converter only uses the RX port, while the TX port is deactivated
- Unit and port LEDs allow for quick status information
- Auto-Negotiation on the 10/100/1000 copper port
- Auto-MDI/MDIX configuration
- Jumbo Frame Support
TRENDnet 100/1000Base-T To SFP Fiber Media Converter, Fiber To Ethernet Converter, 1 x 10/100/1000Base-T RJ-45 Port,1 x Mini-GBIC Slot, Lifetime Protection, Black, TFC-1000MGA
- Mini-GBIC slot accommodates Multi (SX) or Single-Mode (LX) fiber modules
- 100/1000Base-T Auto-Sensing / Negotiation Ethernet port
- 100Base-FX / 1000Base-SX / LX Mini-GBIC slot
- Functions as a standalone converter or with the TFC-1600 fiber chassis
- Lifetime TRENDnet Manufacturer's Warranty
TRENDnet's 100/1000BASE-T to SFP Media Converter, model TFC-1000MGA, is a reliable Plug-and-Play Fiber-to-Ethernet converter in a compact form factor. This versatile fiber converter supports both Multi-Mode (SX) and Single-Mode (LX) fiber standards for transmission distances of up to 80 kilometers (50 miles).
The Mini-GBIC slot and Gigabit Ethernet port Auto-Negotiate between 100 and 1000Mbps transmission speeds. Diagnostic LEDs on the front of the converter convey device status. Control Auto-Negotiation (Forced/Auto-Negotiation) and Link Loss Return (Enable/Disable) with an internal dip-switch. This sturdy metal housed converter can be installed as a standalone unit and is compatible with TRENDnet's expandable 16-Bay Fiber Converter Chassis System, model TFC-1600.
Compliant with IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-SX/LX standards
1 x 10/100/1000Base-T RJ-45 port
1 x 100Base-FX/1000Base-SX/LX Mini-GBIC slot
Provides Dip switch to set: Fiber (Forced/Auto-Negotiation), LLR (Enable/Disable)
Support LLCF (Link Loss Carry Forward, Link Pass Through)
Monitor and configure Ethernet or Fiber's duplex mode, LLR, and receive link down information via management module TFC-1600MM and chassis TFC-1600
Status LED indicators for Power, Link/Activity and Fail
Wall mountable
Compatible with TRENDnet's 16-Bay Fiber Converter Chassis System, model TFC-1600 (holds up to 16 TFC series Media Converters)
Lifetime TRENDnet Manufacturer's Warranty
PACKAGE CONTENTS
TFC-1000MGA
Multi-Language Quick Installation Guide
Power Adapter (5V, 1A)
- Functions as a standalone converter or with the TFC-1600 fiber chassis
- Lifetime TRENDnet Manufacturer's Warranty
- 100Base-FX / 1000Base-SX / LX Mini-GBIC slot
- 100/1000Base-T Auto-Sensing / Negotiation Ethernet port
- Mini-GBIC slot accommodates Multi (SX) or Single-Mode (LX) fiber modules
Tripp Lite LC Multimode Fiber to Gbe Media Converter POE+ 10/100/1000 550M
Extends Power and Data to a PoE+ Device up to 550 Meters via LC Multimode Fiber Cable
This economical unit converts a multimode fiber optical signal to a copper Ethernet signal that extends both power (48 VDC) and 10/100/1000 Mbps Gigabit Ethernet to a PoE+ (Power over Ethernet) device. Because Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N785-P01-LC-MM1 with multimode fiber cable to reach greater distances. This could include providing both data and power to PoE and PoE+ devices, such as security cameras, VoIP telephones, point-of-sale kiosks and access control devices.
Supports Power over Ethernet to Save You Money and Give You More Installation Choices
PoE saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install PoE devices in areas far away from AC outlets, such as poles or ceilings.
Supports Auto-Sensing of Network Speed and Other Advanced Functions
Monitoring and controlling your network nodes is easy with the N785-P01-LC-MM1's advanced features, such as automatic network speed sensing, full/half-duplex auto-detection and automatic MDI/MDIZ configuration. Six LEDs indicate the converter's power, PoE, Ethernet network and fiber link statuses at a glance. Link fault pass through (LFP) monitors both the LC and RJ45 ports to ensure link status remains active.
Works in Tandem with Tripp Lite's N785-001-LC-MM Media Converter
This media converter connects to the N785-001-LC-MM using multimode fiber optic cabling with LC ends (such as Tripp Lite's N520-Series, sold separately) to extend an Ethernet network connection up to 550 meters. Use Cat5e/6 cabling (such as Tripp Lite's N001- or N201-Series cables) to deliver data and power to a 10/100/1000 Mbps PoE device up to 100 meters (328 feet) from the N785-P01-LC-MM1.
Completely Plug-and-Play with No Additional Software Required for Connection
The compact metal converter is easy to install and set up with no software or drivers required. The included power supply connects to a convenient AC outlet with no computer or other signal source needed.
- Meet the multiple network connectivity needs of today's network environment with this 2 transceiver/media converter
- Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters
- With 10/100/1000Base-T technology get up to 1000Mbps data transfer rate over supported network cable
AddOn 1000Base-TX To 1000Base-SX SC MM 850nm POE Media Converter
Addoncomputer.com Media Converters and Network Interface Cards are 100% compliant for all of our networking needs. Now you have a cost effective solution to your network upgrade needs. With our ADDON CERTIFICATION TEST Program, we can guarantee your product will work right the first time.
- Attach multiple devices together or expand the number of devices connected to your existing network by using 2 transceiver/media converter
- With Twisted Pair cable, get the desired data transfer rate up to a required distance
- With 10/100/1000Base-T technology get up to 1000Mbps data transfer rate over optical fiber cable
- The Internal provides convenient installation
TP-LINK MC220L – Gigabit SFP to RJ45 Fiber Media Converter
The MC220L is a media converter designed to convert 1000BASE-SX/LX/LH fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX/LX/LH standards, the MC220L is designed for use with multi-mode/single-mode fiber cable utilizing the SC/LC-Type connector. It works at 850nm on both transmitting and receiving data when adopting multi-mode fiber and 1310nm on both transmitting and receiving data when adopting single-mode.
- Long-Range Transmission: When used with different types of SFP modules, the Hot-Swappable FX Port extends fiber distance up to 12.4miles (20km) for Single-Mode transmission and 1,800 feet (550m) for Multi-Mode transmission.
- Auto-Negotiation Gigabit Connection: Auto-negotiation RJ45 port supports Half-Duplex/Full-Duplex transfer mode and auto-MDI/MDIX.
- Easy to Use: Plug and play with no software installation or configuration needed.
- Versatile Compatibility: Works with both single-mode and multi-mode fiber SFP modules and is fully compatible with 10/100/1000 Base-T Ethernet connections.
- Convert Fiber to Ethernet: Designed to convert 1000BASE-SX/LX fiber to 1000Base-T copper media or vice versa.
Allied Telesis MMC2000/LC Transceiver/Media Converter
The Allied Telesis MMC Series of mini media converters leverages its smaller size to not only help the environment with a small carbon footprint, but also to save space in its working environment. Despite its compact size, the MMC Series delivers all the power and functionality of standard size media converters.
Extend Networks
The MMC Series are available in 100Mbps or 1000Mbps models. Depending on the model chosen, the fiber-optic port has options for fixed SC, ST, LC or SFP connectors capable of multi-mode or single-mode fiber connectivity. The twisted-pair copper port has an RJ-45 connector supporting either 100Mbps or 1000Mbps, with a maximum operating distance of 100 meters (328 feet).
VLAN Support
Many new backbone switch products now support the industry-standard IEEE 802.1Q specification for Virtual LANs (VLANs) that send extra-long data packets on the network. The MMC Series are fully compatible with these long packets, enabling them to be used in modern networks. Media converters not supporting this feature discard these extra long packets, making them unsuitable for modern networks.
Small and Flexible
The smaller size and external power supply of the MMC Series allows them to be used almost anywhere.
Smart MissingLink (SML)
The Smart MissingLink™ (SML) feature monitors network connections and provides notification when network segments fail, allowing network managers to quickly identify the source and location of failed segments and minimize downtime.
Smart Link Restoration
Smart Link restoration allows the devices, in cases of power failure, link loss or other interrupted service, to automatically restore the link without the need to restart/reset them.
Power Saving
The MMC Series continues the Allied Telesis commitment to the environment with over 50% power savings. With just 1.7W of power usage, the MMC Series media converters are some of the most efficient in the market today.
Link Test
The link test is a fast and easy way for you to test the connections between the media converter ports and the connected end nodes. If a network problem occurs, you can perform a link test to determine which port is experiencing a problem, and focus your troubleshooting efforts on the right cable or end node.
- Convert speed as well as media type
- 2K MAC address tables
- Store-and-forward switching mode
- Transparent to IEEE 802.1Q packets
- Auto Negotiation and Auto MDI/MDIX on copper port
- IEEE support on copper
- Far End Fault on Fiber
- 10K byte Jumbo packets
- Link/Activity LED per port
- Smart MissingLink
Black Box RS-232 to RS-422/RS-485 DIN Rail Converter
Convert async RS232 to RS422/485 at speeds up to 19.2 kbps with distances up to 4000 ft over CATx cables. These devices are great for connecting RS232 devices into an existing RS422/485 environment in factory automation, building automation, and process automation. They can be mounted using DIN Rail and can withstand operating temperatures of -40 to 176 degrees F (-40 to 80 C).
- Switch-selectable data rates between 2400 bps and 19.2 kbps.
- Async (data leads) only.
- Powered by 10-30 VDC, 100 mA
- Optically isolates and converts unbalanced half- or full-duplex RS-232 signals to optically isolated and balanced full-duplex RS-422 or 2-wire half- or 4-wire full-duplex RS-485.
- Withstands operating temperatures of -40 to 176 degrees F (-40 to 80 C).
- 2-wire half-duplex or 4-wire full-duplex, RS-422 Full-duplex
- Transmit data up to 19.2 kbps or at distances up to 4000 ft.
Transition Networks Mini Fast Ethernet Media Converter
Fiber Integration
Used in pairs or as a single unit, this mini media converter will ease the integration of fiber optic cabling into copper-rich Fast Ethernet environments
Extend Network
Distance Fiber supports the transmission of Fast Ethernet data over much longer distances than is possible twisted pair
Low-Latency
Design As a layer-1 design, this Mini converter will retransmit Fast Ethernet signals without any store-and-forward packet inspection delays found in other layer-2 devices
- Expand your network capacity and fulfill requirement with this 2 transceiver/media converter
- With Optical Fiber cable, get the desired data transfer rate up to a required distance
- With 10/100Base-TX technology get up to 100Mbps data transfer rate over twisted pair cable
- Rackmountable feature for convenient and safe installation of device
AddOn 10/100/1000Base-TX(RJ45) to 1000Base-SX(SC) MMF 850nm 550m POE Media Converter
- 1Gbs media converter for all of your data transfer needs
- 1 RJ-45 port to SC RJ-45 port to fit your application
- Application and environment tested and guaranteed to work
- Attach multiple devices together or expand the number of devices connected to your existing network by using 2 transceiver/media converter
- Supports twisted pair cables for durability and improved signal transfer while ensuring smooth and seamless data transfer
- With 10/100/1000Base-TX technology get up to 1000Mbps data transfer rate over optical fiber cable
- No hassle of internal installation, install externally
StarTech.com 10/100 Mbps Ethernet Single Mode WDM Fiber Media Converter Kit SC 20km
The ET90110WDM2 10/100 Mbps Ethernet Single Mode WDM Fiber Media Converter Kit SC (20km) lets you extend a 10/100 Mbps Ethernet connection over single mode fiber, at distances up to 20 km (12.4 mi).
The converter offers Wavelength-Division Multiplexing (WDM), enabling bi-directional communication over a single strand of fiber, essentially doubling the capacity of your existing fiber infrastructure without having to install new cabling.
The Ethernet to WDM Fiber Kit includes both endpoints (two interchangeable modules) - a simple solution for connecting 10/100Base-T networks to remote locations using SC-terminated single mode fiber. The Ethernet to Fiber Converter also features a durable all-steel chassis, and a simple plug-and-play installation with minimal configuration required.
For added versatility, this fiber media converter supports standalone operation, or one or both sides can be installed into a 20 Slot, 2U Rackmount Chassis (ETCHS2U).
Backed by a StarTech.com 2-year warranty and free lifetime technical support.
- Easy to use and install
- Supports full or half-duplex operation
- Advanced features include Link-loss forwarding, remote status monitoring, two frame lengths
- Maximum Fiber Cable Length of 20 Km
- Supports standalone operation, or installation into the ETCHS2U Rackmount Chassis
- Kit includes local and remote converter module for a complete solution
- WDM (Wave Division Multiplexing) technology allows the use of a single fiber cable for full-duplex bi-directional communication
SIIG Portable VGA & USB Audio to HDMI Converter
- Connects your VGA-equipped computer to an HDMI display, projector or home theater system
- Supports 1080p and PC resolution up to 1280x1024@60Hz
- Supports high quality USB audio
- Low power consumption. Powered directly from the USB bus
- Compact & portable for business travelers
- Expand your network capacity and fulfill requirement with this 3 transceiver/media converter
- No hassle of internal installation, install externally
StarTech.com USB to Fiber Optic Converter – 100Mbps – USB 2.0 Network Adapter – 100Base-FX SC Duplex Multimode Fiber/MMF – 2Km – Compact
Fiber-optic SC port
With an opticaltransceiverfor 100Base-FX networks, the USB to fiber converter delivers network connectivity with a maximum range of 2 km over multimode fiber.
Secure fiber-to-the-desk connectivity
For reliable fiber connectivity, this USB to fiber-optic converter protectsyour network from problems with electronic interference - a common issue with copper Ethernet networks. Fiber-to-the-desk connectivity (FTTD) maximizes network security, reducing the risk of data leaks of sensitive information, without compromising network speed and reliability.
Easy portability
Compact and portable, this USB 2.0 to fiber-optic converter is powered directly from the USB port, making it easy to connect when you're on the go.
Plug and play
Get up and running quickly. The USB fiber-optic converter supports certified drivers for Windows and Linux®. When you plug the adapterinto a USB port, you simply install the drivers and the adapter is ready to transmit over a fiber network.
The US100A20FXSC is backed by a StarTech.com 2-year warranty and free lifetime technical support.
- TECH SPECS: 100Mbps
- 1x SC Female Duplex
- ASIX AX88772C
- 1x USB 2.0 Type A
- Multi-Mode Fiber
- 1310 nm
- 2 km/1.2 mi
- VLAN Bus-Powered
- Windows, Windows Server, MacOS, Linux LTS Kernel
- EASY-TO-USE USB to FIBER OPTIC CONVERTER: Use with USB-enabled computer, which is ideal for occasional access to a fiber LAN, or for laptop users without internal fiber network card
- COMPACT FORM FACTOR: Easily portable and can be easily carried in a standard laptop bag if needed; no power adapter means fewer cords to carry, and a quick and easy setup
- EASY TO DEPLOY: Integrated SC MM fiber connection makes deployment easy and predictable; fewer parts to damage or lose vs an open SFP solution
- STARTECH.COM ADVANTAGE: IT professionals choice for over 30 years; this fiber network adapter is backed for 2 years by StarTech.com, including free 24/5 North America based multi-lingual tech support
Transition Networks Mini M/E-PSW-FX-02(SC) Media Converter
Connect Legacy Networking Equipment
Connect an existing 10 Mbps device to 100 Mbps devices.
Eliminate Collision Domains
Separate Collision Domains while linking two half-duplex hubs with a collision free full duplex connection over fiber.
The Mini Media Converters provide a cost-effective method for integrating fiber optic cabling into a 10/100 UTP environment. With its miniature size, the Mini offers a space saving alternative while it converts copper to fiber with the smallest footprint available in the industry.
- Expand your network capacity and fulfill requirement with this 2 transceiver/media converter
- With 10/100Base-TX technology get up to 100Mbps data transfer rate over twisted pair cable
- The Wall Mountable provides convenient installation
StarTech.com PoE+ Industrial Fiber to Ethernet Media Converter 60W – SFP to RJ45 – SM/MM Fiber to Gigabit Copper IP-30
It converts a fiber network link to a PoE-enabled copper RJ45 Ethernet connection to provide data and power to remote PoE devices like security cameras, sensors, wireless, lighting, and more. The converter provides a powerful networking solution for campuses, warehouses, factories or any applications that require PoE and connectivity over long distances.
Designed for Harsh Environments
This 60W media converter can be installed almost anywhere you need it as it has been engineered to work in environments with large temperature changes. The converter also includes a set of DIN mounting rails for additional installation options.
OPERATING TEMPERATURE STORAGE TEMPERATURE -40°C to 75°C -40°C to 85°C -40°F to 167°F -40°F to 185°FUp to 60 Watts of Power for Connected Devices
60 watts of available support a wide range of PD devices such as:
- Pan-and-Tilt Cameras
- Lighting
- Cameras
- Sensors
- WiFi Access Points
Open SFP Slot to Leverage Your Current Infrastructure
The Gigabit fiber media converter provides a cost-efficient way to connect high powered devices over a fiber link. It features an open SFP slot that lets you choose the MSA compliant Gigabit SFP that best suits your fiber connection mode (single/multimode) and distance requirements.
Dual Power Inputs
Accepts terminal block power or coaxial power connectors with the barrel plug adapter, allowing the product to be hardwired or powered using an external power supply (not included), which does not require professional installation.
The IMC1GSFP60W is backed by a StarTech.com 2-year warranty and free lifetime technical support.
- EXTEND, CONVERT, POWER: Fiber to Ethernet media converter with PoE extends & converts fiber to RJ-45 copper; Provides up to 60W of PSE power to PoE/PoE+/PoE++ PD devices like cameras and sensors
- TECH SPECS: 1 Gbps
- 1 x Open SFP (MSA Compliant)
- 1x RJ45
- 48V-56VDC
- IEEE 802.3af / IEEE 802.3at (60W)
- 10/100/1000Mbps
- LFP
- 16K Jumbo Frames
- DIN or Wall Mount Hardware Included
- 2 yr warr
- ROBUST DESIGN: Industrial Gigabit Media Converter w/MTBF 500,000+hrs @ 50C
- Vibration, shock & free fall rated
- Rugged IP-30 aluminum housing
- Hardened operating temp -40C to 75C
- OPEN SFP SLOT: Any MSA compliant SFP can be used for the incoming multimode or singlemode fiber connection; easy deployment across applications or fiber cable types
- FLEXIBLE POWER: Can be hardwired using terminal block (48-56VDC) power or powered using a standard Type-N barrel wall adapter (not included)
- STARTECH.COM ADVANTAGE: IT professionals' choice for over 30 years
- This media converter is backed for 2-years by StarTech.com, including free 24/5 North America based multi-lingual tech support
Tripp Lite SC Multimode Fiber to Gbe Media Converter POE+ 10/100/1000 550M
Extends Power and Data to a PoE+ Device up to 550 Meters via SC Multimode Fiber Cable
This economical unit converts a multimode fiber optical signal to a copper Ethernet signal that extends both power (48 VDC) and 10/100/1000 Mbps Gigabit Ethernet to a PoE+ (Power over Ethernet) device. Because Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N785-P01-SC-MM1 with multimode fiber cable to reach greater distances. This could include providing both data and power to PoE and PoE+ devices, such as security cameras, VoIP telephones, point-of-sale kiosks and access control devices.
Supports Power over Ethernet to Save You Money and Give You More Installation Choices
PoE saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install PoE devices in areas far away from AC outlets, such as poles or ceilings.
Supports Auto-Sensing of Network Speed and Other Advanced Functions
Monitoring and controlling your network nodes is easy with the N785-P01-SC-MM1's advanced features, such as automatic network speed sensing, full/half-duplex auto-detection and automatic MDI/MDIZ configuration. Six LEDs indicate the converter's power, PoE, Ethernet network and fiber link statuses at a glance. Link fault pass through (LFP) monitors both the SC and RJ45 ports to ensure link status remains active.
Works in Tandem with Tripp Lite's N785-001-SC-MM Media Converter
This media converter connects to the N785-001-SC-MM using multimode fiber optic cabling with SC ends (such as Tripp Lite's N520-Series, sold separately) to extend an Ethernet network connection up to 550 meters. Use Cat5e/6 cabling (such as Tripp Lite's N001- or N201-Series cables) to deliver data and power to a 10/100/1000 Mbps PoE device up to 100 meters (328 feet) from the N785-P01-SC-MM1.
Completely Plug-and-Play with No Additional Software Required for Connection
The compact metal converter is easy to install and set up with no software or drivers required. The included power supply connects to a convenient AC outlet with no computer or other signal source needed.
- Meet the multiple network connectivity needs of today's network environment with this 2 transceiver/media converter
- Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances
- With 10/100/1000Base-T technology get up to 1000Mbps data transfer rate over twisted pair cable
StarTech.com Gigabit Ethernet Fiber Media Converter – Compact – 850nm MM LC – 550m – With MM SFP Transceiver
Cost-effective extension and dependable performance
The Gigabit Fiber Media Converter provides a cost-effective and dependable solution for shorter range network extensions. It connects an Ethernet network to remote devices over a fiber backbone, with a 550m range on the fiber optic interface. The media converter has a durable metal housing, engineered to deliver long-lasting performance.
Versatile connections for broad compatibility
Fully compatible with10/100/1000Base-T Ethernet networks, thefiber media converter supports auto negotiation to bridge different speed networks and devices to a Gigabit fiber network.It provides versatile connectivity to your existing networks and devices, allowing you tomaximize the usage and performance of legacy equipment.
The multimode transceiver is removable, giving you the flexibility to change your transceiver in the future to meet your networking needs.
Easy installation and compact convenience
The unmanaged fiber media converter has a standalone design with simple plug-and-play set-up to ensure fast and easy installation. Compact in size, the converter gives you flexible installation options - including a wall mounting option to save space.
The MCM1110MMLCis backed by a StarTech.com 2-year warranty and free lifetime technical support.
- 9K Jumbo Frame supported
- Supports IEEE 802.1q Tag VLAN pass through
- Auto MDIX
- Link Fault Pass (LFP) supported
- Durable metal housing
- 550m range on fiber optic interface
- 850nm LC multimode Gigabit fiber connection using the included SFP transceiver
- Compact standalone design and wall mounting option for easy and convenient installation
- 10/100/1000 Mbps RJ45 port supports auto negotiation to bridge different network speeds and devices to a Gigabit fiber network
- Convert between an RJ45 copper Ethernet connection and a fiber optic connection to extend your network cost-effectively
StarTech.com 10/100 Mbps Multi Mode Fiber Media Converter ST 2 km
The ET90110ST2 10/100 Mbps Multimode Fiber Media Converter (ST, 2 km) lets you extend a Fast Ethernet network (10/100 Mbps) over multimode fiber, at distances of up to 2 km (1.2 miles).
A cost-effective solution for connecting a 10/100 Mbps Ethernet (10/100Base-T) network to remote network segments over a 100Base-FX fiber backbone. Designed to offer a durable and convenient Ethernet to fiber solution, the Ethernet to ST Fiber converter features an all-steel chassis, and a simple plug-and-play installation with minimal configuration required.
For added versatility, this fiber media converter supports standalone operation, or installation into the 20 Slot, 2U Rackmount Chassis (ETCHS2U).
Backed by a StarTech.com 2-year warranty and free lifetime technical support.
- Supports standalone operation, or installation into the ETCHS2U Rackmount Chassis
- Cost-effective way to extend/bridge networks using fiber cabling
- Advanced features include Link-loss forwarding, remote monitor status, two frame lengths
- Supports a maximum fiber cable length of 2 km
- Supports full or half-duplex operation
- Quick and simple installation, easy to use
FC-1126 SEH Fiber Adapter
Printing in Fiber Optic Networks - A Perfect Solution for HP Printers
FC126 and FC1126 are integrated adapters for connecting HP printers to fiber optic networks. There are many media/fiber converters on the market, FC126 and FC1126, however, are essentially different.
- Meet the multiple network connectivity needs of today's network environment with this 2 transceiver/media converter
- Supports twisted pair cables for durability and improved signal transfer while ensuring smooth and seamless data transfer
- With 1000Base-SX technology get up to 1000Mbps data transfer rate over twisted pair cable
- The Internal provides convenient installation
Tripp Lite SC Multimode Fiber Media Converter Gigabit 10/100/1000 RJ45 550M 850nm
- Supports Multimode 50/125 cable up to 550M or 62.5/125 cable up to 400M
- Auto detects Full/Half Duplex Transfer Mode
- Extends a Gigabit Ethernet signal up to 550M over Multimode Fiber Optic Cable
AddOn Transceiver/Media Converter
This MSA compliant QSFP28 to SFP28 converter provides conversion from QSFP28 to SFP28 form factors. It is built to MSA standards and is uniquely serialized and data-traffic and application tested to ensure that it will integrate into your network seamlessly. It is built to meet or exceed the specifications of MSA Compliant, as well as to comply with MSA (Multi-Source Agreement) standards to ensure seamless network integration. This converter is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty.
- With Optical Fiber cable, get the desired data transfer rate up to a required distance
- With 25GBase-X network technology, get fast transfer rate and reliable data connection
Black Box Pure Networking Transceiver/Media Converter
High-quality media conversion
Adapt your deployment. This media converter easily converts 10/100BASE-TX to 100BASE-FX-TP-to-ST/SC/VF-45/MT-RJ.
Smooth connection
This media converter is designed with a switch controller and buffer memory that ensures two segment types connect without issue.
Straight-forward installation
Quick installation and setup. This converter can be used as a standalone unit or as a slide-on module to the 19" converter rack chassis for use in a central wiring closet.
- Converts 10/100BASE-TX to 100BASE-FX
- Switch controller and buffer memory
- Use as a standalone unit or with available chassis (LHGC-RACK)
- 10-Mbps and 100-Mbps data forward rates
- Link fault pass-through functionality
StarTech.com 10 Gigabit Ethernet Copper-to-Fiber Media Converter – Open SFP+ – Managed – 10G Ethernet Media Converter
The 10G fiber converter delivers fast and reliable network access at longer distances than copper-based networks, making it ideal for server rooms or workstations in remote areas or in other buildings.
Expand your high-speed network over longer distances
This high-performance fiber media converter integrates nicely into a variety of 10 Gigabit networks. And, because the card supports up to 10Gbps throughput, you can quickly bridge your traditional 10Gb copper (RJ45) based network across long distances using fiber-optic cable.
Now you can transfer large files and access high-bandwidth multimedia content in less time, even in remote locations.
Use the SFP+ transceiver that's best for you
With an open SFP+ slot, the 10GbE media converter adapts to your network connection and distance requirements. Plus, because it's compatible with most 10GbE SFP+ transceivers, it offers more possibilities for connecting devices and users to your network. With support for a wide range of transceivers, the network converter is ideal for dynamic, high-performance data centers.
Simple network management and diagnostics
The 10 Gigabit fiber media converter offers built-in management functionality, so you can quickly, yet effectively manage and customize your network settings through the local serial console port.
Prepare your network for the future
If your existing network consists of RJ45 copper-based devices and cables, you might not be ready for future network expansion. Because the newest fiber-based network switches feature SFP+ ports more often than RJ45 ports, you might need a converter to bridge your copper and fiber networks together.
This versatile fiber media converter is the perfect way to add users and devices to your network, now or in the future, while simultaneously interfacing your copper and fiber network mediums.
The ET10GSFP is backed by a StarTech.com 2-year warranty and free lifetime technical support.
- Achieve faster network access over longer distances, and extend your 10Gb copper (RJ45) network using fiber optic cable
- Integrate into your network using the SFP+ transceiver of your choice ? the open SFP+ slot is compatible with most 10Gbps SFP+ modules
- Manage and customize the media converter to fit your needs, using the serial console management port
- Empty expansion bay lets you install an additional converter card using a compatible StarTech.com ET91000 series media converter card module
- Four link fault pass-through (LFP) modes (UTP to fiber, fiber to UTP, two-way, disabled)
- Two built-in cooling fans
- Rugged, metal housing
- Up to 9.6K Jumbo Frame support
- Supports IEEE 802.3ae (10GBase-R), and 802.3an (10GBase-T) protocols
- Supports Auto MDIX, ALS, Loopback, and DDMI
StarTech.com Industrial Fiber to Ethernet Media Converter – 100Mbps SFP to RJ45/CAT6 SM/MM – Fiber to Copper Network – IP-30 12V Input
An industrial media converter that converts fiber to copper at a network endpoint.
A Flexible Solution Covering Different RequirementsThis media converter features an open SFP slot for any standard SFP to be used for the incoming fiber connection and is easily deployed across applications or fiber cable types. Accepts terminal block power or coaxial power connectors with the barrel plug adapter, allowing the product to be hardwired or powered using an external power supply (not included), which does not require professional installation. It can be powered using 18V-36V AC or 12V -56V DC for a high degree of flexibility including applications like solar, automotive, and rail. Includes hardware for DIN rail or wall mounting.
For Mission-Critical ApplicationsDesigned with IP-30 housing and has an MBTF of >500,000 hrs (Telcordia/Bellcore) at 50°C and an operating temperature range of include -40 C to 75 C for durability; it's rated to various vibration, shock, and free-fall standards:
- Vibration: EN 60068-2-6
- Shock: EN 60068-2-27
- Free-Fall: EN 60068-2-32
Accepts terminal block power or coaxial power connectors with the barrel plug adapter, allowing the product to be hardwired or powered using an external power supply (not included), which does not require professional installation.
The IMC100MSFP is backed by a StarTech.com 2-year warranty and free lifetime technical support.
- COMPACT SIZE + FLEXIBLE POWER INPUT: Smallest form factor Fiber to Ethernet media converter - extends & converts 100Mbps fiber to RJ45 copper; powered by 18-36V AC or 12V-56V DC for solar, auto & rail
- ROBUST DESIGN: Industrial Network Media Converter w/MTBF 500,000+hrs @ 50C
- Vibration, shock & freefall rated
- Rugged IP-30 aluminum housing
- Hardened operating temp -40C to 75C
- OPEN SFP SLOT: Compatible with any standard SFP and can be used for multimode or single mode fiber connections; easy deployment across applications, fiber distances or fiber cable types
- TECH SPECS: 100Mbps
- AC (18-36V) or DC (12-56V)
- Single Mode SMF & Multi-Mode MMF Fiber
- 16K Jumbo Frames
- LFP
- DIN/Wall Mountable
- Terminal Block and/or Barrel Adapter for power flexibility
- STARTECH.COM ADVANTAGE: IT professionals' choice for over 30 years
- This media converter is backed for 2-years by StarTech.com, including free 24/5 North America based multi-lingual tech support
Transition Networks 10/100/1000 Ethernet Media Converter Stand-Alone
The SGFEB provides a cost effective method for integrating 1000Base-SX/LX fiber into a 10/100/1000Base-T copper environment. Deploying fiber into today's networks provides the ability to transmit data over significantly longer distances than is possible on copper. Fiber also protects your data from external sources of noise and interference, improving network performance.
- Connect different types of media within a network with this single port
- Supports twisted pair cables for durability and improved signal transfer while ensuring smooth and seamless data transfer
- With 10/100/1000Base-T technology get up to 1000Mbps data transfer rate over supported network cable
- Tuck the device out of the way with its Wall Mounting feature
StarTech.com 10GbE Fiber Ethernet Media Converter 10GBASE-T- SFP to RJ45 Single Mode/Multimode Fiber to Copper Bridge 10Gbps Network
Cost-Effective Extensions and Flexible Performance
The RJ45 to fiber media converter provides a cost-efficient way to connect an Ethernet network to remote devices over a fiber backbone. It features an open SFP+ slot that supports the MSA-compliant 10 Gigabit SFP+ that best suits your fiber connection setup (single mode/multimode) and distance requirements.
A Versatile Way to Connect Different Networks
The 10Gb fiber media converter supports auto-negotiation while providing versatile connectivity to existing networks and devices, maximizing the usage and performance of legacy equipment.
Network Compatibility:
- 10GBASE-ER
- 10GBASE-LR
- 10GBASE-LW
- 10GBASE-EW
- 10GBASE-R
- 10GBASE-SR
- 10GBASE-SW
- 10GBASE-T
Fast and Easy Installation
The unmanaged fiber media converter has a standalone compact design with simple plug-and-play setup to ensure fast and easy installation.
StarTech.com Fiber Media Converters
Overcome the distance limitations of traditional network cables with StarTech.com fiber media converters. Our converters connect different types of network cabling and help you extend networks between buildings and over longer distances. Whether you need to extend a network connection 550 m or 40 km, we can help you. The MCM10GSFP Ethernet Fiber Media Converter is backed by a StarTech.com 2-year warranty and free North American based multilingual lifetime technical support.
- FIBER ETHERNET MEDIA CONVERTER: Extends & converts 10Gbps fiber to RJ45 copper; Supports multimode & single mode fiber connections & a wide variety of fiber protocols depending on SFP+ module used
- DEPLOY REMOTELY: Plug-and-play for copper to fiber or fiber to copper Ethernet network conversion with open SFP+ slot for any MSA Compliant SFP+ module; can be deployed by non-technical staff
- TECH SPECS: 10 Gbps
- 10GBASE-T
- Unmanaged
- LFP
- SMF & MMF
- SC (Full Duplex)
- RJ45
- Mountable
- Power adapter incl.
- Open SFP+
- RELIABLE & DURABLE DESIGN: External steel housing with ESD Surge Protection; Contact and Air Discharge Protection. MTBF rating exceeds 38,400 hrs
- TESTED & PROVEN: This multigigabit media converter is backed by a StarTech.com 2-year warranty and free lifetime 24/5 multilingual Technical Advisors to support deployments across all time zones.
Black Box PoE PSE Media Converter
Constrained by the distance limits of PoE over copper? Incorporate fiber into your network! This PoE PSE Media Converter not only enables you to connect copper cables to long-distance fiber data links, it also safely powers compatible devices plugged in on the copper side. Fully compliant with the 802.3af Power over Ethernet (PoE) standard, the converter functions as power source equipment (PSE) to provide -48 VDC power via copper wiring to access points, cameras, and similar devices in areas without nearby power outlets. For equipment protection, it offers overcurrent and undercurrent detection, as well as fault protection input and power monitoring. It also has powered device signature sensing to detect when a 802.3af compliant device is connected downstream. Plus, link-fault passthrough and far-end fault detection features keep you from sending valuable data across invalid links.
This product is covered by one of more of the following: United States Patent Nos. 7,457,250; 8,902,760; and/or 9,019,838.
- Supports 802.3x flow control on full-duplex ports and backpressure on 10BASE-T/100BASE-TX half-duplex ports.
- Powered device (PD) signature sending detects when a PoE device is connected.
- A low-cost, economical solution for powering PoE devices over the same CATx link used for data communications.
Black Box Gb ETH MED CONV SFP
The Micro Mini Media Converter is ideal for bringing fiber to desktop and mobile applications where lightweight, compact size, and low power requirements are critical. Weighing only 2.5 ounces and about the length of a house key, this ultra-compact media converter is portable yet powerful.
For extra versatility, it can be USB-powered, making it easy to provide fiber connectivity to locations where AC or DC power is unavailable, for instance, field-deployed fiber-to-the-laptop. For easy portability, this tiny converter conveniently slips into a pocket or laptop carrying case.
The converter is plug-and-play with an RJ-45 port that auto negotiates for speed, duplex mode, and crossover functions for PCs with 10BASE-T, 100BASE-TX, and 1000BASE-T Ethernet. On the fiber side, the converter accepts SFPs for connection to a variety of Gigabit Ethernet fiber types.
Use it with Black Box 1250-Mbps SFPs (LFP411, LFP412, LFP413, LFP414) or any other standard 1250-Mbps SFP. Because it can be powered through a computer's USB 1.0 or 2.0 port, the Micro Mini Media Converter is ideal for connections to fiber in areas where a spare power outlet may not be available. When plugged into a computer's USB port, the media converter shuts down automatically when you turn off the computer, which saves energy.
- Ultra compact, weighing only 2.5 ounces
- LED indicators for power, UTP, and fiber status
- Supports Jumbo Ethernet frames up to 10,240 bytes
- UTP port supports 10/100/1000BASE-T
- USB-powered for portability, use it with the included power adapter
- SFP port supports Gigabit Ethernet using 1250-Mbps SFP transceivers
- Bring fiber to the desktop conveniently and cost-effectively
Black Box Pure Networking Fast Ethernet (100-Mbps) Media Converter
High-quality media conversion
Adapt your deployment. This media converter easily converts 10/100BASE-TX to 100BASE-FX-TP-to-ST/SC/VF-45/MT-RJ.
Smooth connection
This media converter is designed with a switch controller and buffer memory that ensures two segment types connect without issue.
Straightforward installation
Quick installation and setup. This converter can be used as a standalone unit or as a slide-on module to the 19" converter rack chassis for use in a central wiring closet.
- Converts 10/100BASE-TX to 100BASE-FX
- Switch controller and buffer memory
- Use as a standalone unit or with available chassis (LHGC-RACK)
- 10-Mbps and 100-Mbps data forward rates
- Link fault pass-through functionality
Black Box Async RS232 to RS422/485 Interface Converter – DB9 to Terminal Block
- Enables you to select RS-485 2-wire half-duplex or RS-485 4-wire full-duplex operation.
- Selectable RS-422 operation with transmit and receive always enabled.
- Automatic RS-485 driver control, so it works without any special programming for handshaking signals. Also enables transmitter from RS-232 TD signal and receiver when not transmitting.
- Built-in bridging switches for 2- or 4-wire operation with no external jumpers to set.
- Set operating mode with four switches.
- Converts using either port power or power from an external 120-VAC/12-VDC power supply (sold separately).
- No external power is required if two RS-232 output handshake lines are available.
- The RS485 driver is automatically enabled during each spacing state on the RS232 side.
- Up to 32 RS485 devices can be attached to create a large multi-drop network
- async (data leads) only.
- Operates 2-wire half-duplex or 4-wire half- or full-duplex.
- Operates in point to point or multipoint applications
- Transmit data up to 115 kbps or at distancesup to 4000 ft.
Black Box MultiPower LGC010A-R2 Transceiver/Media Converter
BLACK BOX Miniature Media Converters make it easy to bring fiber to the desktop. Just connect a Miniature Media Converter to your PC's copper port with a CAT5 cable, then connect a fiber cable to the converter's other side. That's all there is to it! Best of all, you can tuck these tiny converters unobtrusively behind your PC. Choose from multimode and single-mode duplex fiber versions. For extra versatility, you can power the Miniature Media Converter through the external AC power supply included with each converter or through the optional rackmount PowerTray (sold separately).
- Auto MDI/MDI-X means you never need to worry about what kind of cable to use.
- Powered by a universal AC power supply or the optional rackmountable PowerTray.
- Compact size; measures just 0.8"H x 1.8"W x 3.4"D.
- Bring fiber to the desktop more conveniently and at a lower cost than installing fiber NICs
StarTech.com 10/100 Mbps Single Mode Fiber Media Converter SC 30 km
The ET90110SM302 10/100 Mbps Single Mode Fiber Media Converter SC (30 km) lets you extend a Fast Ethernet network (10/100) over single mode fiber, at distances up to 30 km (18.6 miles).
A cost-effective solution for connecting a 10/100 Mbps Ethernet (10/100Base-T) network to remote network segments over a 100Base-FX fiber backbone, the media converter is designed to offer a durable and convenient Ethernet to fiber solution, with an all-steel chassis, and simple plug-and-play installation with minimal configuration required.
For added versatility, this fiber media converter supports standalone operation, or installation into the 20 Slot, 2U Rackmount Chassis (ETCHS2U).
Backed by a StarTech.com 2-year warranty and free lifetime technical support.
- Easy to use and install
- Supports full or half-duplex operation
- Maximum Fiber Cable length of 30 km
- Advanced features include Link-loss forwarding, remote status monitoring, two frame lengths
- Cost-effective way to extend/bridge networks using fiber cabling
- Supports standalone operation, or installation into the ETCHS2U Rackmount Chassis
Black Box Gigabit PoE+ Media Converter – 10/100/1000BASE-T to SFP
This tough media converter is the ideal way extend your network over fiber and also power a PoE device. Use it to link to faraway PoE devices such as IP security cameras, wireless access points, and VoIP phones. The media converter features two autosensing 10/100/1000 UTP ports plus an SFP port that can be customized to virtually any interface - including multimode fiber, single-mode fiber, or Gigabit copper - through the use of a standard SFP. Both UTP port supports 802.3at Power over Ethernet, enabling it to power a PoE+ PD device. The Gigabit PoE+ Media Converter can be powered three ways: from an AC power supply (LGC5210-PS, included), via the DC power jack, or via the DC terminal block. When used with DC power to the terminal block, the converter supports an extended operating temperature range of +32 to +158 degrees F (0 to +70 C). The converter requires only one power source to power both the converter and a PoE+ device; you can position the PoE+ device up to 100 meters (328 feet) away from the converter, enabling flexible placement of wireless APs and security cameras. A pair of input terminals and output terminals enables you to cascade DC power in a DIN rail installation (optional DIN Rail Clip (LXC-DR) is sold separately).
- Features an extended temperature range when used with DC terminal-block power
- Acts as power sourcing equipment (PSE) on the copper side to power PoE devices.
- Both UTP ports are autosensing with Auto MDI/MDI-X; Both UTP port supports 802.3at PoE+.
- Features two 10-/100-/1000-Mbps copper ports and one SFP port that can be customized to the interface of your choice through the use of standard SFPs.
StarTech.com USB C to Fiber Optic Converter – Open SFP – USB 3.0 Gigabit Ethernet Network Adapter – 1000BASE-SX/LX – Windows / Mac / Linux
A flexible solution with an open SFP slot
The open SFP slot enables you to use your preferred SFP transceiver module to meet your networking needs - use an SFP with your desired wavelength, distance, connection type to achieve an efficient network solution. (SFP sold separately.)
Secure fiber-to-the-desk connectivity
This USB to fiber-optic converter provides reliable fiber connectivity while protecting your network from problems with electronic interference - a common issue with copperEthernet networks. Fiber-to-the-desk connectivity (FTTD) maximizes network security, reducing the risk of data leaks for sensitive information, without compromising network speed and reliability.
Easy portability
Compact and portable, this USB-C to fiber-optic converter is powered directly from the USB port.
Plug and play
Get up and running quickly. The USB to fiber-optic converter supports certified drivers for Windows, Mac and Linux®. Once the adapter is plugged into a USB-C port, you simply install the drivers and the adapter is ready to transmit over a fiber network.
The US1GC30SFP is backed by a StarTech.com 2-year warranty and free lifetime technical support.
- Provides a fiber network connection to portable laptops or tablets
- Fiber-to-the-desk connectivity (FTTD) enhances security, reducing the risk of data leaks
- Add a Gigabit Ethernet (1000Mbps) connection through a USB 3.0 Type-C interface
- Highly portable design, with no need for an external power adapter (bus powered)
- Open SFP slot, compatible with MSA compliant SFP modules
- Certified drivers for Windows, macOS and Linux
- Plug-and-play installation
- Wake-on-LAN support
Tripp Lite SC Multimode Fiber to Gbe Media Converter POE+ 10/100/1000 2KM
Extends your copper Gigabit Ethernet network connection up to 2 km (1.2 mi.) over SC fiber optic cable with the addition of PoE.
- Extends power (48 VDC) + data (1000 Mbps) to any edge PoE+ device
- Supports multimode fiber optic cable with SC connectors up to 2 km (1.2 mi.)
- RJ45 jack supports auto-MDI/MDIZ to bridge various network devices
- Supports both full- and half-duplex operation
- Works in tandem with Tripp Lite N785-001-SC (sold separately)
- Expand your network capabilities with this 2 transceiver/media converter
- Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters
- With 10/100/1000Base-T technology get up to 1000Mbps data transfer rate over twisted pair cable
Black Box USB to RS422/485 Converter with Opto-Isolation
- Great for linking older serial devices to computers or laptops with USB ports.
- Offers 2-wire RS-485 or 4-wire RS-422/RS-485 operation.
- Holds connections tight with its high-retention USB connector.
- USB 1.0, USB 1.1, and USB 2.0 compatible (12 Mbps).
- Interface powered. No external power required.
- Serial terminal block can be removed for easy wiring.
- LEDs indicate transmitting and receiving of data.
This compact device quickly converts USB port connections to RS-422/485 so you can connect legacy serial devices to a newer PC or laptop. Continue to use legacy commercial and industrial RS-422/485 devices without making any changes to the applications written for them.
Plus, because it features 2000-volt optical isolation, you can protect your PC and other equipment from dangerous spikes and surges on the RS-485/RS-422 network.
Simply plug it into your PC's USB port using the included USB cable (3-ft.), then configure its DIP switches for 2- or 4-wire operation. The converter will show up as an additional COM port in your PC's Windows Device Manager.
- Get the range and multidrop capability of RS-422/-485 from your PC's USB port
- Also protects PCs and other connected devices from surges and spikes
- Ideal for use in environments heavily susceptible to voltage spikes and ground loops
Black Box MultiPower LGC011A-R2 Transceiver/Media Converter
Bring fiber to the desktop more conveniently and at a lower cost than installing fiber NICs. Black Box Multipower Miniature Media Converters make it easy to bring fiber to the desktop. Just connect a Miniature Media Converter to your PC's copper port with a CAT5 cable, then connect a fiber cable to the converter's other side. That's all there is to it! Best of all, you can tuck these tiny converters unobtrusively behind your PC. Choose from multimode and single-mode duplex fiber versions. For extra versatility, you can power the Miniature Media Converter through the external AC power supply included with each converter or through the optional rackmount PowerTray (sold separately).
- Auto MDI/MDI-X means you never need to worry about what kind of cable to use.
- Compact size; measures just 0.8"H x 1.8"W x 3.4"D.
- Powered by a universal AC power supply or the optional rackmountable PowerTray.
- Bring fiber to the desktop more conveniently and at a lower cost than installing fiber NICs
Tripp Lite Fiber Optic 10/100/1000 to 1000BaseLX SC Gigabit Multimode Media Converter 2km 1310nm
- Auto-Senses 10 / 100 / 1000
- Half or Full Duplex Operation
- Automatic MDI/MDI-X configuration
- Cost-effective solution for extending network distance up to 2 km
- Converts UTP Gigabit Ethernet to Fiber Optic
Black Box RS232 to RS-422 Interface Bidirectional Converter
- Interface powered by the RS232 control leads.
- 4-wire operation, full-duplex.
- Async (data leads) only.
- Operates point to point only.
- Transmit data up to 115 kbps or at distancesup to 4000-ft.
Transition Networks SGFEB1014-130 Transceiver/Media Converter
The SGFEB provides a cost effective method for integrating 1000Base-SX/LX fiber into a 10/100/1000Base-T copper environment. Deploying fiber into today's networks provides the ability to transmit data over significantly longer distances than is possible on copper. Fiber also protects your data from external sources of noise and interference, improving network performance.
- Meet the multiple network connectivity needs of today's network environment with this 2 transceiver/media converter
- With Twisted Pair cable, get the desired data transfer rate up to a required distance
- With 10/100/1000Base-T technology get up to 1000Mbps data transfer rate over optical fiber cable
- The Rail-mountable provides convenient installation
Ethernet Mm Fiber Converter Sc
A cost-effective solution for connecting a 10/100 Mbps Ethernet (10/100Base-T) network to remote network segments over a 100Base-FX fiber backbone, the media converter is designed to offer a durable and convenient Ethernet-to-fiber solution, featuring an all-steel chassis, and a simple plug-and-play installation with minimal configuration required.
For added versatility, this fiber media converter supports standalone operation, or installation into the 20 Slot, 2U Rackmount Chassis (ETCHS2U).
Backed by a StarTech.com 2-year warranty and free lifetime technical support.
- Supports full or half-duplex operation
- Easy to use and install
- Supports a maximum fiber cable length of 2 km
- Advanced features include Link-loss forwarding, remote status monitoring, two frame lengths
- Supports standalone operation, or installation into the ETCHS2U Rackmount Chassis
AddOn 10/100/1000Base-TX(RJ-45) to Open SFP Port Media Converter
Addoncomputer.com Media Converters and Network Interface Cards are 100% compliant for all of our networking needs. Now you have a cost effective solution to your network upgrade needs. With our ADDON CERTIFICATION TEST Program, we can guarantee your product will work right the first time.
- 1 RJ-45 port to SFP RJ-45 port to fit your application
- Application and environment tested and guaranteed to work
- 1Gbs media converter for all of your data transfer needs
StarTech.com USB to Fiber Optic Converter – 1000Base-SX SC – USB 3.0 to Gigabit Ethernet Network Adapter – 550m MM – Windows / Mac / Linux
Fiber-optic SC port
The USBto fiber-optic converter is equipped with anoptical transceiver for 1000Base-SX networks, providingnetwork connectivity with a maximum range of 550 m over multimode fiber.
Secure fiber-to-the-desk connectivity
This USB to fiber converter provides reliable connectivitywhile protecting your network from problems with electronic interference - a common issue with copper Ethernet networks. Fiber-to-the-desk connectivity (FTTD) maximizes network security, reducing the risk of data leaks for sensitive information, without compromising network speed and reliability.
Easy portability
Compact and portable, this USB 3.0fiber-optic converter is powered directly from the USB port, making it easy to connect when you're on the go.
Plug and play
Get up and running quickly. The converter supports certified drivers for Windows, Mac and Linux®. When you plug the adapter into a USB port, you simply install the drivers and the adapter is ready to transmit over a fiber network.
The US1GA30SXSC is backed by a StarTech.com 2-year warranty and free lifetime technical support.
- Provides a fiber network connection to portable laptops or tablets
- Fiber-to-the-desk connectivity (FTTD) enhances security, reducing the risk of data leaks
- Add a 1000Mbps 1000BaseSX SC Ethernet connection through a USB 3.0 Type-A interface
- Highly portable design, with no need for an external power adapter (bus powered)
- 1000Base-SX 1X9 SC optical transceiver
- 550 m range over multimode fiber
- Certified drivers for Windows, macOS and Linux
- Plug-and-play installation
- Wake-on-LAN support
ENET 10/100/1000Base-T Power Over Ethernet (PoE)
Media converters interface between two cable types. The most common use for media converters is to insert fiber for network extensions, up to 40 kilometers or more, beyond the 100-meter limit imposed by copper cable. Fiber media converters, also known as fiber transceivers or Ethernet media converters, are simple networking devices that make it possible to connect two dissimilar media types. Media converters are important in interconnecting fiber optic cabling-based systems with existing copper-based, structured cabling systems.
- Supports twisted pair cables for durability and improved signal transfer while ensuring smooth and seamless data transfer
- With 10/100/1000Base-T technology get up to 1000Mbps data transfer rate over twisted pair cable