3m comply attachment system-bezel laptop type
3m Display Materials And Syste 3m Comply Attachment System-bezel Laptop Type
$19.99
3m comply attachment system-bezel laptop type
5 in stock
Weight | 0.1600 kg |
---|---|
Dimensions | 6.00 × 5.00 × 5.00 cm |
UPC |
051128009727 |
MPN |
COMPLYBZ |
Recently Viewed Products
Dr Swivel Desk Office Chair, Ergonomic Executive – Blue
StarTech.com 2U Adjustable Mounting Depth Vented Sliding Rack Mount Shelf – 50lbs / 22.7kg
Offering a weight capacity of up to 50 lbs (22.7 kg), the sliding rack shelf features a ventilated, cold-rolled steel shelf on two locking adjustable rails which allow the shelf to be installed into cabinets or racks with mounting depths from 20in (510mm) to 30in (744mm). The locking feature locks the shelf 3/4 of the way out, preventing the shelf from accidentally falling out of the rack or sliding back in before maintenance is complete.
Backed by a StarTech.com lifetime warranty.
- Adjustable rails offer compatibility with almost any server rack or cabinet
- Simple sliding and locking mechanism makes it easy to access anything even deep on the shelf
- Ventilated shelf design improves air flow and helps lower temperatures in the rack
Tripp Lite Portable Cooling Unit / Air Conditioner 12K BTU 3.5kW 120V 60Hz – Gen 2 Update
Tripp Lite's award-winning SRCOOL12K, now in its second generation, is a portable, compact, self-contained air conditioning unit designed for server rooms, small network closets, back offices and other areas with heat-sensitive equipment that facility air conditioning can't reach. Design improvements based on customer feedback include upgraded commercial-grade components designed to last longer, including an upgraded hot air exhaust fan. The SRCOOL12K Gen 2 also boasts robust packaging for better protection from shipping damage and an updated two-year warranty. This SmartRack® server rack cooling unit pumps 12,000 BTU (3.5kW) of cooling into your IT environment to help prevent shutdowns, malfunctions and other failures caused by overheating or fluctuating temperatures. It uses environmentally friendly R410A refrigerant to comply with worldwide standards. An easy-to-read control panel with diagnostic LEDs provides convenient local management. Close-coupled cooling delivers cold air near heat loads to discourage recirculation and increase energy efficiency. An included 71-inch flexible hose lets you aim the cold air to a specific spot, such as an overheated rack enclosure or an equipment hot spot. Hot air exits through a window or drop ceiling via an included exhaust kit. An upgraded hot air exhaust fan maintains effectiveness even under a high heat load. The unit also dehumidifies and filters the air, providing better air quality that can enhance operating conditions and equipment reliability. With a 100-percent duty cycle, the SRCOOL12K can run continuously without costly downtime. It uses copper tubing that is stronger than the aluminum tubing used in most consumer cooling units. The copper allows higher pressures and better weld joints to stand up to the constant vibration of the running compressor. The evaporator expels the condensed water through the directional exhaust duct, eliminating the need for a drain tube, drain pan or water collection tank and saving you time and money. No external condenser, refrigerant piping or professional maintenance is required for simple operation. Upgraded firmware allows the compressor to cycle on and off while the evaporator fan stays on to prevent icing in high-humidity environments. Install the optional SRCOOLNETLX network module (sold separately) to monitor temperatures, receive alerts, review logs and control settings from anywhere, anytime, via SNMP, web browser, SSH, telnet or command line interface. The built-in LX Platform's PowerAlert® Device Manager provides a single interface to cycle the connected air conditioner on and off, adjust its fan speed, change its target set point temperature and switch to dehumidification mode. The self-contained SRCOOL12K requires no disruptive construction projects or costly service calls from plumbers or HVAC specialists.
- 2-year limited warranty
- 100% duty cycle keeps your equipment constantly cool with no downtime
- Self-contained design with no plumbing or special circuits-easy setup by almost anyone
- Built-in evaporator for drip-free operation-no need to empty water collection tanks
- Filters and dehumidifies air to further enhance equipment performance
- 12,000 BTU (3.5kW) of cooling capacity protects vital equipment against overheating
Reviews
There are no reviews yet.